曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Airbus Industrie A319, A320 and A321 Series Aeroplanes
AD/A320/187 Amdt 1 (continued)
Page 4 of 4
Investigation showed that the upper support of the NLG shock absorber was damaged
and the anti- rotation lugs were ruptured. This led the nose wheels to lose their
centered position reference normally ensured by the shock-absorber cams. The
BSCU had logged a steering system fault, because hydraulic power was not available
at the time of steering system checks, therefore the BSCU was not able to proceed
with the re-centering of the wheels.
To prevent reoccurrence of landings with the NLG turned 90 degrees, this AD
introduces operational procedures and maintenance actions.
This amendment changes the applicability, introduces an additional boroscopic
inspection and provides a terminating action to the AD through modifications.
The original issue of this AD became effective on 5 December 2005.
David Punshon
Delegate of the Civil Aviation Safety Authority
16 February 2007
1
GMI
Innovation In Technology for Advanced Structure
Manufacturing and Repair
Metallic & Composite Structures, Solution Engineering, Training
9 Rue Buffault 75009 Paris France
Tel : (33) 1 42 82 11 44 Fax : (33) 1 42 82 98 38 Email : gmi.aero@wanadoo.fr
NDT EQUIPMENT
Damage Assessment through
Ultrasonic Test
- Consoles GMI-ELISA
-Carbon Structure Thickness Specimens
Infra - Red Thermography for
Water Detection - Application to
AIRBUS Elevator Repairs
V: 050201
2
ELISA NDT
3
ELISA, COMPOSITE DAMAGE EVALUATION CONSOLE
Elisa is a very
attractive product
that groups
all the necessary
equipment
for conducting
damage analysis
by Ultrasonic
Methods.
The objective is to
allow the technician
to draw the
limit of a damage
(delamination or
disbonding) and
to specify the situation
of a delamination
in depth.
The Ultrasonic
Instrument itself
is appropriate for
working on composites;
it is light, not cumbersome, and offers all the sophisticated treatment capabilities of a PC Integrated
Instrument.
A complete Set of Composite Specimens representative of the composite thickness of modern planes can
be offered as part of the equipment for thickness and ply calibration.
The system is conceived so that a delamination can be detected and its position determined in terms of PLY.
The kit of thickness specimens is used to calibrate the tunings of signals ( see following chapter).
ELISA CONSOLE CONTENT
THE ULTRASONIC INSTRUMENT
The instrument is designed to be integrated in a
portable laptop specially conceived for in the field
use.
The GMI UC 2010 is an industrial computer specially
designed to be a field instrument. It has all the characteristics
of a desktop computer, but its structure
allows a use in particularly hard environment. All its
main components (processor, board, hard disk, …)
are fixed safely and connected via cooling channels
with each other. Its structure is made of cast magnesium
and thus especially lightweight and robust.
SPECIFICATIONS
** subject to variations due to laptop continuous
evolutive performances .
The PC Laptop
Dimensions : 92 x 385 x 301 mm
Weight : 6.5 kg
Humidity : 5 to 95 % (non condensed)
Temperature : 5 to 45 °C
Power supply : AC Voltage 115/230 autoswitch
with external power supply
Battery : internal buffer battery
smart battery 42 Wh ;
The GMI UC 2010 is updated to the state of the art
computer processing power :
Processor : Intel-Pentium® mobile PIII
Clock frequency :400 MHz ; 100 MHz FSB
Memory : 256 KB Cache RAM 64 MB
Slot : 1 long ISA/PCI slot
Color display : TFT XGA, 14.1’’, 1024 x
768 pixels, 262144 colors
Mass storage : floppy disk drive (3.5’’ – 1.44 MB)
Hard disk 6 GB
CD-ROM
Interfaces : keyboard detachable, integrated trackball
2 x RS 232 (external mouse supplied)
1 x parallel / 2 x USB A / IrDA
Ethernet 10/100
VGA onboard
Headphone / Microphone
Operating system :Windows Version updated at the
time of producing
The Instrument Ultrasonic Board Specifications
The ultrasonic board has been specially developped for
the ultrasonic damage assessment.
Transmitter Circuit :
Type : negative rectangular pulse
Emission frequency : 300 Hz to 8 kHz adjustable
Sensor’s frequency : 1 MHz to 20 MHz
Transmitter : protected against short
Output impedance : < 1 Ω
Emission voltage : 10 to 230 V adjustable
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空翻译14(165)
