COMPONENT MAINTENANCE MANUAL WITH ILLUSTRATED PARTS LIST B757−200 PASSENGER SEAT 乘客座椅(5)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

G.  The foodtray of ctr console and the backside worktable of shell in front of the passenger can be connected for maximum applicable surface.
H.  The shell and center console consists of several parts of a subcontractor. Please find on the following pages a table for P/N reference.

Recaro Aircraft Seating GmbH & Co. KG, Daimlerstrasse 21, D.74523 Schw.bisch Hall
COMPONENT MAINTENANCE MANUAL . 6510A TYPE 654 SERIES
3.  OPERATION
A.  Seat adjustments per seat control panel (Refer figure 1, detail A)

(1)  
Single functions For use the single function press the button until the desired position is reached.

(2)  
Comfort functions

 

To adjust a comfort position (upright, lazy1/2 or bed) press the button until the movement ends, thus the desired position is reached.
To save an actual position as memory function, press the button twice in a short time ( max. 1 second).
To adjust the saved memory function press the button until the movement ends, thus the desired position is reached.
B.  Use of the Center Console (Refer figure 1, detail B)

(1)  
Food Tray Table Cartridge Assembly

The Food Tray Table is accessed by opening the cocktail table 90 degree clock.wise. The Tray can then be manually pulled up vertically and then lowered into the deployed position and adjusted in the forward and aft position.

(2)  
Privacy Divider
Privacy divider can be rotate up or down.

 

(3)  
Miscellaneous Stowage
Miscellaneous Stowage is accessed from the aft side of the Center Console.

 

C.  Use of the Shell Assembly (Refer figure 1, detail C)

(1)  Proximity Lights
This is connected to the aircraft emergency escape path lighting system.

 

Recaro Aircraft Seating GmbH & Co. KG, Daimlerstrasse 21, D.74523 Schw.bisch Hall
COMPONENT MAINTENANCE MANUAL . 6510A TYPE 654 SERIES

(2)  
Reading Light

(a)  
Touch the switch momentary on the LED reading light assembly to turn it on in bright mode.

(b)  
Touch the switch momentary on the LED reading light assembly again. The light will turn on in DIM mode.

(c)  
Touch the switch momentary on the LED reading light assembly again. The light will turn off.

 

(3)  
Worktable

(a)  
Hold the worktable and pull it to unlock.

(b)  
Lower the worktable completely until the deployed position.

(c)  
To extend the worktable, slide it until stops.

(d)  
To stow the worktable, slide it to front, and lift up until the vertical position. To lock the worktable,smoothly push it against the seat panel.

 

(4)  
Armrest

(a)  
Pull the lever located in the front of the armrest, and slightly push the armrest down until it stops.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：COMPONENT MAINTENANCE MANUAL WITH ILLUSTRATED PARTS LIST B757−200 PASSENGER SEAT 乘客座椅(5)