Assembly
Page 521 Apr 1/05 Copying, use or disclosure of information on this page is subject to proprietary restrictions.
20-00-02/70-00-01
Table 512. Gasketed Fittings in Low Temperature Alloys - AZ91G-T6
Torque Values for Gasketed Fittings Installed in AZ91G-T6 Magnesium or any of the Family of Low Temperature Magnesium Alloys
TUBE TUBE
UNION AN815 or MS 24392 & DYNAMIC OD
DASH PLUG AN814 or MS 24391 BEAM SEAL FITTINGS
THREAD SIZE (IN-LBS)
(N-m)
(IN-LBS) (N-m)
(INCH) NO.
0.1250
2 0.3125 --24 15 --20
1.6947720 --2.2596960
12 --15 1.3558176 --1.6947720
0.1875
3 0.3750 --24 25 --30
2.8246200 --3.3895440
20 --25 2.2596960 --2.8246200
0.2500
4 0.4375 --20 40 --45
4.5193920 --5.0843160
35 --40 3.9544680 --4.5193920
0.3125
5 0.5000 --20 50 --55
5.6492400 --6.2141640
45 --50 5.0843160 --5.6492400
0.3750
6 0.5624 --18 75 --80
8.4738600 --9.0387840
50 --55 5.6492400 --6.2141640
0.5000
8 0.7500 --16 140 --150
15.8178720 --16.9477200
105 --115 11.8634040 --12.9932520
0.6250
10 0.8750 --14 210 --230
23.7268080 --25.9865040
185 --195 20.9021880 --22.0320360
0.7500
12 1.0625 --12 360 --380
40.6745280 --42.9342240
290 --380 32.7655920 --42.9342240
(FT-LBS)
(N-m)
(FT-LBS) (N-m)
1.0000
16 1.3125 --12 35 --40
47.4536300 --54.2327200
35 --40 47.4536300 --54.2327200
1.2500
20 1.6250 --12 55 --60
74.5699900 --81.3490800
50 --55 67.7909000 --74.5699900
1.5000
24 1.8750 --12 70 --80
94.9072600 --108.4654400
70 --75 94.9072600 --101.6863500
TUBE OD (INCH) TUBE DASH NO. THREAD SIZE NUT AN924
(IN-LBS) (N-m)
0.1250 2 0.3125 --24 12 --15 1.3558 --1.6947720
0.1875 3 0.3750 --24 15 --20 1.6948 --2.2596960
0.2500 4 0.4375 --20 30 --35 3.3895 --3.9544680
0.3125 5 0.5000 --20 35 --40 3.9545 --4.5193920
0.3750 6 0.5624 --18 55 --60 6.2142 --6.7790880
0.5000 8 0.7500 --16 105 --115 11.8634 --12.9932520
0.6250 10 0.8750 --14 165 --175 18.6425 --19.7723400
0.7500 12 1.0625 --12 280 --300 31.6357 --33.8954400
(FT-LBS) (N-m)
1.0000 16 1.3125 --12 25 --30 33.8955 --40.6745400
1.2500 20 1.6250 --12 45 --50 61.0118 --67.7909000
1.5000 24 1.8750 --12 60 --65 81.3491 --88.1281700
Assembly
Page 522 Apr 1/05 Copying, use or disclosure of information on this page is subject to proprietary restrictions.
20-00-02/70-00-01
Table 513. Dynamic Beam Seal Tubing and Fittings
Torque Values for Dynamic Beam Seal Tubing and Fittings -Assemblies with Lubricants TUBE ALL STEEL OR TITANIUM PARTS
TUBE OD (INCH) TUBE DASH NO. THREAD SIZE ALL STEEL OR TITANIUM PARTS
(IN-LBS) (N-m)
0.1875 3 0.3750 -- 28 84 --108 9.4907232 --12.2023584
0.2500 4 0.4375 --24 144 --168 16.2698112 --18.9814464
0.3125 5 0.5000 --24 156 --192 17.6256288 --21.6930816
0.3750 6 0.5624 --20 240 --300 27.1163520 --33.8954400
0.5000 8 0.7188 --20 420 --480 47.4536160 --54.2327040
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：标准施工手册 STANDARD PRACTICES MANUAL 20-00-02/70-00-01(114)
