R **ON A/C 106-149, 151-156, 159-199, 201-299, 301-399, 401-499,
Post SB 46-1009 For A/C 151-152,201-203,
Post SB 46-1013 For A/C 151-156,201-209,
C. ATSU DATALINK Pages The ATSU DATALINK menu is accessible on the MCDU menu and gives access to the COMM MENU page. (Ref. Fig. 002A) The RETURN command is always available on key 6L and enables crew to display the COMM MENU page.
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 46-24-00Page 17 1401-499, 1Aug 01/05 1 1 1CES 1
ATIMS - Access to DSP USER-DEFINED Pages R Figure 004
R 1EFF : 153-158, 204-209, 1 46-24-00Page 18 1 1 May 01/03 1 1 1CES 1 The AUDIT PRINT SET OFF function is available when the audit mode was set on and enables to disable this function directly from this page without having to get access to the AUDIT page.
(1) COMM CONFIG page The COMM CONFIG page enables the crew to enter or check:
-
the A/C REGISTR (ARN)
-
the ACARS A/L ID
-
the STANDARD A/L ID
-a VHF3 scan mask.
(Ref. Fig. 003A)
(a) A/C Register (2L) This page enables crew to enter or display the Aircraft Registration Number (ARN) at all times and mainly in the case where the ARN information from the CFDIU is wrong or inexistent
(e.g. "F-WWAI").
NOTE : The ARN enables the initialization of the ATSU Router
____
Function (ARF).
(b)
ACARS A/L ID (3L) Crew enters the airline identification over two characters (e.g. "AP").
(c)
STANDARD A/L ID (4L) Crew enters the airline identification over three characters
(e.g. "AIB").
(d)
VHF3 SCAN SEL (4R) This prompt enables to access to the VHF3 SCAN SELECT page where the crew selects a list of service providers.
(2) VHF3 SCAN SELECT page (Ref. Fig. 003A) This page is used to determine the list of service providers to be scanned and their priority level corresponding to the order of selection. The VHF3 SCAN MASK is compulsory for the router operation.
(a) SP SELECT (1L, 2L, 3L, 4L, 1R, 2R, 4R) These prompts display all the selectable service providers in scan mask and show whether a SP is selected or not and if it is, its priority level instead of SELECT.
R 1EFF : 106-149, 151-156, 159-199, 201-299, 1 46-24-00Page 19 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
(b)
NEW SCAN SELECT/ALL INPUTS ERASE (5L) This command enables to display a virgin menu to prepare the entry of a new scan mask or when a scan mask is already activated, it enables to erase it.
(c)
SCAN MASK ACTIVATE (5R) This command enables to store the last selection and activate the VHF SCAN MASK command.
**ON A/C 151-158, 201-209,
(3) VHF3 DATA MODE page
**ON A/C 151-152, 201-203,
(Ref. Fig. 005)
**ON A/C 151-158, 201-209,
Post SB 46-1009 For A/C 151-152,201-203,
(Ref. Fig. 005B)
**ON A/C 151-158, 201-209,
The VHF3 DATA MODE page displays all the Data Service Providers
selected in the VHF3 scan mask.
Each Data Service Provider is associated with a frequency.
This page is used for VHF media control and enables to:
-select a DSP among the scan mask and activate this DSP on VHF. Once the DSP is selected, the network manager orders a change of frequency (corresponding to the DSP) to the VHF3.
-
visualize the way the DSP frequency has been selected in the top section of the page: . MANUAL indication when the crew selects a country . SCAN indication as long as the ATSU has not completed the scanning . REMOTE AUTOTUNE indication when an autotuned frequency is requested in uplink message . AUTO indication when the frequency is acquired after an automatic scanning
-
visualize the present mode of the VHF operation in the top section of the page:
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 46-24-00Page 20 1401-499, 1Aug 01/05 1 1 1CES 1
ATIMS - Access to VHF3 CONTROL Mode Pages R Figure 005
R 1EFF : 151-152, 201-203, 1 46-24-00Page 21 1 1 May 01/03 1 1 1CES 1
ATIMS - Access to VHF3 DATA Mode, VHF3 VOICE DIRECTORY and COMPANY CALL Pages
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 信息系统 INFORMATION SYSTEMS(90)
