15. On the VHF3 SCAN MASK page:
-push the line key adjacent to the RETURN TO COMM INIT indication.
16. On the COMM INIT page:
-push the line key adjacent to the RETURN TO COMM MENU indication.
17. On the COMM MENU page:
-push the line key adjacent to the VHF3 DATA MODE indication.
-the ACARS STBY memo goes out of view. NOTE : The initialization of the ATSU
____
router is now completed.
On the MCDU 1 (2 or 3):
-
the COMM INIT page comes into view.
On the MCDU 1 (2 or 3):
-
the COMM MENU page comes into view.
On the VHF3 DATA MODE page:
-
the DATA indication, the ServiceProvider name and the related frequency indications come into view in the top section of the page.
-make sure that the list of the Service Providers shown is the same as the selection you made on the VHF3 SCAN MASK page.
1EFF : 151-152, 201-203, 1 46-21-00Page 209 1 1 Aug 01/05R 1 1 1CES 1
R **ON A/C 106-149, 151-156, 159-199, 201-299, 301-399, 401-499,
Post SB 46-1009 For A/C 151-152,201-203,
Post SB 46-1013 For A/C 151-156,201-209,
Subtask 46-21-00-860-059-B
A. Initialization of the ATSU Router
CAUTION : IF YOU CUSTOMIZED THE ATSU-ROUTER PARAMETER-DATABASE WITH THE
_______ TWO- AND THREE-LETTER AIRLINE IDENTIFICATION AND WITH A SCAN MASK, DO NO TRY TO DO THE INITIALIZATION PROCEDURE OF THE ATSU ROUTER. THE ROUTER IS AUTOMATICALLY INITIALIZED. ON THE COMM CONFIG PAGE OF THE MCDU:
-ALL THE MANDATORY PARAMETERS ARE SHOWN IN GREEN , AND YOU CANNOT CHANGE THEM
-THE VHF3 SCAN SELECT AND THE CONFIG ACTIVATE PROMPTS ARE NOT SHOWN.
(Ref. Fig. 201A/TASK 46-21-00-991-008-A, 202A/TASK 46-21-00-991-009-B)
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the center pedestal, on the
RMP 1 (2 or 3):
-
set the ON/OFF switch to ON
-
set VHF 3
2. On the MCDU 1 (2 or 3): On the MCDU 1 (2 or 3):
-push the MCDU MENU mode key. - the MCDU MENU page comes into view.
On the MCDU MENU page:
-
the ATSU prompt is shown.
On the upper ECAM DU:
-
the ACARS STBY memo or the DATALINK ATSU FAULT + ATSU INIT FAULT warning is shown.
NOTE : This warning shows that the ATSU
____ router is not initialized.
3. On the MCDU MENU page: On the MCDU 1 (2 or 3):
-push the line key adjacent to - the ATSU DATALINK page comes into the ATSU indication. view.
R 1EFF : 106-149, 151-156, 159-199, 201-299, 1 46-21-00Page 210 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
Access to COMM CONFIG and VHF3 SCAN SELECT pages
Figure 202A/TASK 46-21-00-991-009-B
R 1EFF : 106-149, 151-156, 159-199, 201-299, 1 46-21-00Page 211 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
4. On the ATSU DATALINK page:
-push the line key adjacent to the COMM indication.
5. On the COMM MENU page:
-push the line key adjacent to the COMM CONFIG indication.
6. On the MCDU 1 (2 or 3):
-push the CLR mode key until the last scratchpad message goes out of view.
7. On the COMM CONFIG page:
-enter the three-character code of the STANDARD A/L ID in the scratchpad
-push the line key adjacent to the STANDARD A/L ID indication (4L).
8. On the COMM CONFIG page:
-enter the two-character code of the ACARS A/L ID in the scratchpad
-push the line key adjacent to the ACARS A/L ID indication (3L).
On the MCDU 1 (2 or 3):
-
the COMM MENU page comes into view.
On the COMM MENU page:
-
the ENTER ACARS A/L IDENT message is shown in the scratchpad.
On the MCDU 1 (2 or 3):
-
the COMM CONFIG page comes into view.
On the COMM CONFIG page:
-make sure that the Aircraft Registration Number is shown in the A/C REGISTR field.
NOTE : This data comes from the CFDIU.
____
On the COMM CONFIG page:
-
the scratchpad is empty and availablefor manual entry
On the COMM CONFIG page:
-
the three characters of the STANDARDA/L ID code come into view in thescratchpad
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 信息系统 INFORMATION SYSTEMS(28)
