(2) On the MCDU, do a check of the reference of the software loaded in the ATSU:
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the MCDU: On the MCDU:
- push the line key adjacent to the ATIMS indication. - the ATIMS menu page comes into view.
2. On the ATIMS page: - push the line key adjacent to the LRU IDENT indication. On the MCDU:- the LRU IDENTIFICATION page comesinto view
- make sure that the ATSU P/N reference shown is the same as the reference
read on the disk(s) of: the ATSU A/C INTERFACE software 20TX the ATSU CONFIGURATION software 21TX
the ATSU ROUTER PARAMETERS software
30TX.
**ON A/C 151-154, 201-207,
Post SB 46-1013 For A/C 151-154,201-207, Subtask 46-21-00-280-056-C
C. Do a check of the Reference(s) of the Software loaded in the ATSU, on the MCDU.
NOTE : It takes one minute approximately to the ATSU software to be
____
operational after the loading procedure.
(1) Do the procedure to get access to the SYSTEM REPORT/TEST/COM page (Ref. TASK 31-32-00-860-003).
R 1EFF : 106-149, 151-156, 159-199, 201-299, 1 46-21-00Page 323 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C 106-149, 151-199, 211-299, 301-399,
R (2) Do a check of the reference of the software loaded in the ATSU, on
R the MCDU:
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R 1. On the MCDU, on the SYSTEM On the MCDU:
R REPORT/TEST/COM page 2/2: - the ATIMS menu page comes into view.
R - push the line key adjacent to
R the ACARS MU indication.
R 2. On the ATIMS page: On the MCDU:
R - push the line key adjacent to - the LRU IDENTIFICATION page comes
R the LRU IDENT indication. into view
R - make sure that the ATSU P/N reference
R shown is the same as the reference
R read on the disk(s) of:
R the ATSU A/C INTERFACE software 20TX
R the ATSU CONFIGURATION software 21TX
R the ATSU ROUTER PARAMETERS software
R 30TX.
Subtask 46-21-00-280-093
D. On the MCDU, do a Check of the Reference of the AOC Software/Database loaded in the ATSU.
NOTE : It takes one minute approximately to the ATSU software to be
____
operational after the loading procedure.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the MCDU:
-push the MCDU MENU mode key.
2. On the MCDU MENU page:
-push the line key adjacent to the ATSU indication.
On the ATSU DATALINK page: On the MCDU:
-
the MCDU MENU page comes into view.
On the MCDU:
-
the ATSU DATALINK page comes intoview.
On the MCDU:
R 1EFF : 106-149, 151-199, 201-207, 211-299, 1 46-21-00Page 324 1301-399, 1May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- push the line key adjacent to the AOC MENU indication. - the AOC MENU page comes into view.
On the AOC MENU page: - push the line key adjacent to the MISC indication. On the MCDU:- the AOC MISCELLANEOUS page comes intoview.
On the AOC MISCELLANEOUS page: - push the line key adjacent to the PART NUMBERS CONFIGURATION On the MCDU:- the AOC CONFIGURATION page comes intoview
indication. - make sure that the AOC
Software/Database P/N reference shown is the same as the reference read on
the disk(s) of the AOC Software/Database 22TX/24TX.
NOTE : After the AOC Database____ uploading, one or more part numbers XX2T0DXXXXXXXXX with the
identification ATSU A/C INTERFACE DB/N or SA can be shown on the LRU IDENT page.
**ON A/C 201-210,
Subtask 46-21-00-280-093-A
D. On the MCDU, do a Check of the Reference of the AOC Software/Database loaded in the ATSU.
NOTE : It takes one minute approximately to the ATSU software to be
____
operational after the loading procedure.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 信息系统 INFORMATION SYSTEMS(42)
