-
the three characters of the STANDARDA/L ID code come into view in therelated boxes.
On the COMM CONFIG page:
-
the two characters of the ACARS A/LID code come into view in thescratchpad
-
the two characters of the ACARS A/LID code come into view in the relatedboxes.
-
the ENTER VHF3 SCAN SELECT message comes into view in the scratchpad.
R 1EFF : 106-149, 151-156, 159-199, 201-299, 1 46-21-00Page 212 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
9. On the MCDU 1 (2 or 3):
-push the CLR mode key to clear the scratchpad message.
10. On the COMM CONFIG page:
-push the line key adjacent to the VHF3 SCAN SEL indication.
11. On the VHF3 SCAN SELECT page:
-push the line key adjacent to the NEW SCAN *SELECT indication.
12. On the VHF3 SCAN SELECT page:
-push successively the line keys adjacent to the Service Providers (SP) indications in the appropriate priority order.
13. On the VHF3 SCAN SELECT page:
-push the line key adjacent to the SCAN SEL ACTIVATE* indication.
14. On the RMP1 (2 or 3): NOTE : If this message does not come
____ into view and if you do not want a new scan mask, go to step 15.
On the COMM CONFIG page:
-
the ENTER VHF3 SCAN SELECT messagegoes out of view in the scratchpad.
On the MCDU 1 (2 or 3):
-
the VHF3 SCAN SELECT page comes intoview.
On the VHF3 SCAN SELECT page:
-
the star "*" adjacent to the SELECTindication goes out of view thencomes into view again.
NOTE : This function erases the
____ selections that you made before.
On the VHF3 SCAN SELECT page:
-make sure that the selected ServiceProviders are in cyan
-
the arrow indication goes out of viewand the priority number of selection#1 (thru #11) comes into view.
On the VHF3 SCAN SELECT page:
-
the star "*" adjacent to the SCAN SELACTIVATE indication goes out of viewthen comes into view again.
-
the Service Providers selected on the scan mask are shown in green.
On the upper ECAM DU:
-
the ACARS STBY memo or the DATALINK ATSU FAULT + ATSU INIT FAULT warning goes out of view.
NOTE : The initialization of the ATSU
____ router is now completed.
R 1EFF : 106-149, 151-156, 159-199, 201-299, 1 46-21-00Page 213 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-if the ACARS indication is not shown in the ACTIVE window, push the transfer pushbutton switch (double arrow) between the two windows.
NOTE : The ATSU controls the VHF
____
3 frequency.
15. On the VHF3 SCAN SELECT page:
-push the line key adjacent to the RETURN indication.
16. On the COMM CONFIG page:
-push the line key adjacent to the RETURN indication.
17. On the COMM MENU page:
-push the line key adjacent to the VHF3 DATA MODE indication.
**ON A/C 151-158, 201-209,On the MCDU 1 (2 or 3):
-
the COMM CONFIG page comes into view.
On the MCDU 1 (2 or 3):
-
the COMM MENU page comes into view.
On the VHF3 DATA MODE page:
-
the MANUAL indication, the ServiceProvider name and the related frequency indications come into view in the top section of the page.
-make sure that the list of the Service Providers shown is the same as the selection you made on the VHF3 SCAN SELECT page.
Post SB 46-1009 For A/C 151-152,201-203,
Subtask 46-21-00-860-059-A
A. Initialization of the ATSU Router
NOTE : Operators with an ADCC CHINA or AEROTHAI DSP contract must do this
____
procedure:
-if ADCC or AEROTHAI is in the ATSU scan mask, erase it
-program ARINC ASIA DSP (USER-DEFINED) (Ref. TASK 46-21-00-860-003)
-select ARINC ASIA DSP in the scan mask.
ARINC ASIA service provider has the same characteristics as ADCC
CHINA and AEROTHAI DSPs and permits operation with these two
service providers.
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 46-21-00Page 214 1401-499, 1Aug 01/05 1 1 1CES 1 NOTE : Operators with an ARINC EUROPE DSP contract must do this procedure
____ to ensure transparency when the ARINC EUROPE DSP changes of frequency:
-do the programming of NEWARINCEU DSP (USER-DEFINED) (Ref. TASK 46-21-00-860-004)
-select ARINC EUROPE and NEWARINCEU DSP in the scan mask.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 信息系统 INFORMATION SYSTEMS(29)
