-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific safety barriers
No specific access platform 3 m (9 ft. 10 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank 28-10-00-910-002 Access to the Fuel Tanks and the Work Areas 28-25-00-650-001 Pressure Defuel 28-25-00-650-003 To Drain Remaining Fuel from the Wing Tanks and the
Center Tank
57-27-11-000-001 Removal of the Access Panel (540AB, 540BB, 540CB, 540DB, 540EB, 540FB, 540GB, 640AB, 640BB, 640CB, 640DB, 640EB, 640FB, 640GB)
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-43-21Page 407 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C 001-001, 051-052,
28-43-21-991-002 Fig. 402
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499, Post SB 28-1077 For A/C 001-001,051-052, 28-43-21-991-002-A Fig. 402A
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
3. Job set up
__________
Subtask 28-43-21-941-051
A. Safety Precautions WARNING : OBEY THE SAFETY PROCEDURES WHEN YOU DO WORK IN A FUEL TANK.
_______
(1) You must obey the fuel safety procedures (Ref. TASK 28-10-00-910-001) when you do work in a fuel tank.
(2) Put the safety barriers are in position.
Subtask 28-43-21-650-050
B. Fuel Configuration
(1)
Defuel the applicable fuel tank (Ref. TASK 28-25-00-650-001).
(2)
Drain the remaining fuel from the applicable fuel tank (Ref. TASK 28-25-00-650-003).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-43-21Page 408 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 Subtask 28-43-21-010-050
C. Get Access
(1)
Put the access platform in the position below the applicable zone 540(640).
(2)
Remove the applicable access panel (Ref. TASK 28-10-00-910-002), (Ref. TASK 57-27-11-000-001)
-
FOR 56QM
remove 540AB
-
FOR 57QM
remove 640AB
-
FOR 58QM
remove 540BB
-
FOR 59QM
remove 640BB
-
FOR 60QM
remove 540DB
-
FOR 61QM
remove 640DB
-
FOR 62QM
remove 540GB
-
FOR 63QM
remove 640GB.
4. Procedure
_________
**ON A/C 001-001, 051-052,
(Ref. Fig. 402/TASK 28-43-21-991-002)
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Post SB 28-1077 For A/C 001-001,051-052,
(Ref. Fig. 402A/TASK 28-43-21-991-002-A)
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-43-21Page 409 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
Magnetic-Level-Indicator Assembly
Figure 402/TASK 28-43-21-991-002
R 1EFF : 001-001, 051-052, 1 28-43-21Page 410 1 1 May 01/05 1 1 1CES 1
Magnetic-Level-Indicator Assembly Figure 402A/TASK 28-43-21-991-002-A
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-43-21Page 411 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 28-43-21-020-051
A. Removal of the Magnetic-Level-Indicator Assembly 56QM thru 63QM
(1)
Remove the nuts (3) from the bolts (6).
(2)
Remove the bolts (6) from the base (2)
(3)
Remove the magnetic-level-indicator (7) from the fuel tank.
(4)
Remove and discard the O-rings (4) and (5).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-43-21Page 412 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 TASK 28-43-21-400-002
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUEL 燃油6(45)
