(4)
Remove the access platform(s).
R TASK 27-21-45-000-003
R Removal of the Cable Tension Regulator (103CM)
R 1. Reason for the Job__________________
R Self Explanatory
R 2. Job Set-up Information______________________
R A. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 27-21-45-000-001 Removal of the Cable Tension Regulator Assy
R 27-21-45-991-005 Fig. 404
R 3. Job Set-up__________
R Subtask 27-21-45-020-053
R A. Remove the cable tension regulator assy (Ref. TASK 27-21-45-000-001).
R 4. Procedure_________
R (Ref. Fig. 404/TASK 27-21-45-991-005)
R Subtask 27-21-45-020-054
R A. Removal of the Cable Tension Regulator
R (1) Remove the six screws (21).
R (2) Remove the plate (22).
R (3) Cut and discard the cotter pin (17) from the nut (18).
R (4) Remove the nut (18) and the washer (16).
R (5) Cut and discard the cotter pin (15) and unlock the nut (14).
R (6) Remove the pin (8), the bellcrank assy (19) and the sleeve (13).
R (7) Remove the six nuts (10) and the six bolts (12).
R R Cable Tension Regulator (103CM) Figure 404/TASK 27-21-45-991-005
1EFF : 1 1 1CES ALL 1 111 27-21-45 Page 424 Feb 01/05
R (8) Cut and discard the cotter pin (2) from the nut (1).
R (9) Remove the nut (1) and the washer (3).
R (10) Remove the bolt (7) with the washer (6).
R (11) Remove the side fittings (9) and (23) from the cable tension
R regulator (11).
R (12) Remove the cable tension regulator (11).
R NOTE : Do not remove the spacer (20), the link (4) and the spacer (5)____
R from the side fitting (9).
R TASK 27-21-45-400-003
R Installation of the Cable Tension Regulator (103CM)
R 1. Reason for the Job__________________
R Self Explanatory
R 2. Job Set-up Information______________________
R A. Consumable Materials
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 08-003 USA MIL-S-22473 GRADE A MIL-R-46082
R SEALANT, ANAEROBIC (Ref. 20-31-00)
R Material No. 08-007 USA MIL-R-46082 TYPE II
R SEALANT, HIGH TEMP. (Ref. 20-31-00)
R B. Expendable Parts
R -------------------------------------------------------------------------------
R FIG.ITEM |DESIGNATION |IPC-CSN
R -------------------------------------------------------------------------------
R 2 cotter pin 27-21-01 12B-170
R 15 cotter pin 27-21-01 12B-170
R 17 cotter pin 27-21-01 12B-280
R C. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 27-21-45-000-003 Removal of the Cable Tension Regulator (103CM)
R 27-21-45-400-001 Installation of the Cable Tension Regulator Assy
R 3. Job Set-up__________
R Subtask 27-21-45-860-052
R A. Make sure that the cable tension regulator is removed (Ref. TASK 27-21-
R 45-000-003).
R 4. Procedure_________
R Subtask 27-21-45-910-050
R A. Preparation for Installation
R (1) Clean the component interface and/or the adjacent area.
R (2) Do a visual inspection of the component interface and/or the adjacent
R area.
R Subtask 27-21-45-420-053
R B. Installation of the Cable Tension Regulator
R (1) Make sure that the spacer (4), the link (5) and the spacer (20) are
R still installed on the side fitting (9).
R (2) Install the side fittings (9) and (23) on the cable tension regulator
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵2(37)
