B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-004 USA MIL-PRF-23827 TYPE I
SYNTH.ESTER BASED GREASE HIGH PRESSURE
(Ref. 20-31-00)
Material No. 05-002 USA MIL-P-8116 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)
Material No. 05-005D USA MIL-C-16173 GRADE II
CORROSION PREVENTIVE (OBSOLETE USE 15-007)
(Ref. 20-31-00)
-------------------------------------------------------------------------------
REFERENCE ------------------------ DESIGNATION-------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
R
R
R
14 cotter pin
14 cotter pin
19 shim washer
19 shim washer
19 shim washer
20 securing plate
20 securing plate
20 securing plate
30 cotter pin
30 cotter pin
30 cotter pin
D. Referenced Information
27-23-04 02 -08027-23-04 02A-08027-23-41 01 -16027-23-41 01A-160 27-23-41 01B-16027-23-41 01 -15027-23-41 01A-150 27-23-41 01B-15027-23-41 01 -08027-23-41 01A-080 27-23-41 01B-080
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-23-00-710-001 29-00-00-864-001
53-55-12-000-001 53-55-12-400-001 55-33-13-010-002
55-33-13-410-002
SB No. A320-27-1130 27-23-17-991-002 27-23-17-991-001 Operational Test of the Rudder Artificial-Feel LoadsPut the Related Hydraulic System in the Depressurized Configuration before Maintenance ActionRemoval of the Rudder Fairings 325AL and 325ARInstallation of the Rudder Fairings 325AL and 325AROpening/Removal of the Trailing Edge Access-Panels 325EL, 325ER, 325DL, 325DR, 325CL, 325CR, 325BL and 325BRClosing/Installation of the Trailing Edge Access-Panels 325EL, 325ER, 325DL, 325DR, 325CL, 325CR, 325BL and 325BR(for corrective action)Fig. 401Fig. 402
3. Job Set-up
__________ Subtask 27-23-17-860-052-A
A. Aircraft Maintenance Configuration
(1)
Make sure that the hydraulic systems are depressurized and put them in the maintenance configuration. (Ref. TASK 29-00-00-864-001).
(2)
Make sure that the warning notices are in position.
(3)
Make sure that the rudder pedals are in the neutral position.
(4)
Make sure that the RUD TRIM indicator on the panel 110VU of the center pedestal shows zero.
(5)
Make sure that the FLT CTL/FAC 1 pushbutton switch on the overhead panel 23VU is released and the OFF legend is on.
(6)
Make sure that the FLT CTL/FAC 2 pushbutton switch on the overhead panel 24VU is released and the OFF legend is on.
(7)
Make sure that the adjustable access platform is in position.
(8)
Make sure that the access door 312AR is open.
(9)
Make sure that the access panel 325BL at the trailing edge of the vertical stabilizer (1) is open (Ref. TASK 55-33-13-010-002).
(10)
Make sure that the rudder fairing 325AL is removed (Ref. TASK 53-55-12-000-001).
(11)
Make sure that the PIN - RIGGING (98D27207547000) (51) is in the rudder cable quadrant and the PIN - RIGGING (98D27207548000) (50) in the bellcrank of the rudder control unit.
1EFF : ALL 1 27-23-17Page 411 1 1 May 01/05R 1 1 1CES 1
Subtask 27-23-17-865-052
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FAC1/28VDC 5CC1 B04 49VU AUTO FLT/FAC1/26VAC 14CC1 B03 121VU AUTO FLT/RUDDER/TRIM/IND 15CC M20 121VU AUTO FLT/FAC2/28VDC 5CC2 M19 121VU AUTO FLT/FAC2/26VAC 14CC2 M18
4. Procedure
_________
(Ref. Fig. 402/TASK 27-23-17-991-001)
Subtask 27-23-17-910-050
A. Preparation for Installation
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵2(103)
