Fits and Clearances of the Bearings of the Rudder Hinge Arm Attach Fittings R Figure 603/TASK 27-21-41-991-008
1EFF : ALL 1 27-21-41Page 606 1 1 Feb 01/02 1 1 1CES 1
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 14.262 | 14.275 | | | | | | | OD 3 |(0.5614) |(0.5620) | | | | | | | | | | 0.000 | 0.031 | | | | | | | | (0.0000)| (0.0012)| | | | | B | 14.275 | 14.293 | | | | | | | ID 1 |(0.5620) |(0.5627) | | | | | | -------------------------------------------------------------------------------
R NOTE : No wear is permitted between the bolt (3) and the bushes (1).____
R
Subtask 27-21-41-220-054
R C. Measurement of the Fits and Clearances of the Rudder Hinge Bearing No. 6 R (Ref. Fig. 601/TASK 27-21-41-991-007)
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | D | 19.024 | 19.037 | | | | | | | OD 4 |(0.7489) |(0.7494) | | | | | | | | | | 0.001 | 0.026 | | | | | | | | (0.0000*| (0.0010*| | | | | D | 19.038 | 19.050 | | | | | | | ID 5 |(0.7495) |(0.7500) | | | | | | ********** DIFFERENCE IN IN. MARKED BY A STAR IS TRUNCATED **********
NOTE : No wear is permitted between the bolt (4) and the bearing (5).
____
R Subtask 27-21-41-220-052
R D. Measurement of the Fits and Clearances of the Actuator Attach Fittings
R (Ref. Fig. 602/TASK 27-21-41-991-009)
R -------------------------------------------------------------------------------
R | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS |
R | DETAIL |---------------------------------------|----------------------------|
R | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. |
R | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. |
R | NO. |-------------------|-------------------|---------|---------| CLEAR. |
R | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)|
R |--------|---------|---------|---------|---------|---------|---------|--------|
R | C | 22.984 | 23.000 | | | 22.984 | | |
R | OD 1 |(0.9048) |(0.9055) | | |(0.9048) | | |
R | | | | 0.000 | 0.037 | | | 0.037 |
R | | | | (0.0000)| (0.0014)| | |(0.0014)|
R | C | 23.000 | 23.021 | | | | 23.021 | |
R | ID 2 |(0.9055) |(0.9063) | | | |(0.9063) | |
R -------------------------------------------------------------------------------
R NOTE : No wear is permitted between the bush (1) and the bush (2).____
R Subtask 27-21-41-220-053
R E. Measurement of the Fits and Clearances of the Actuator Attach Fittings
R (Ref. Fig. 602/TASK 27-21-41-991-009)
R -------------------------------------------------------------------------------
R | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS |
R | DETAIL |---------------------------------------|----------------------------|
R | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. |
R | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. |
R | NO. |-------------------|-------------------|---------|---------| CLEAR. |
R | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)|
R |--------|---------|---------|---------|---------|---------|---------|--------|
R | C | 19.024 | 19.037 | | | 19.024 | | |
R | OD 3 |(0.7489) |(0.7494) | | |(0.7489) | | |
R | | | | 0.000 | 0.034 | | | 0.034 |
R | | | | (0.0000)| (0.0013)| | |(0.0013)|
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵2(15)
