(e)
Remove the actuator (1),(2).
(f)
Remove the sliding bush (4) from the flanged bush (6) in the lever (5).
NOTE : Do not remove the flanged bushes (6),(7) from the levers
____ (5),(11). The bushes (6),(7) are safetied in the levers (5),(11) with loctite.
1EFF : ALL 1 27-26-51Page 406 1 1 Aug 01/01R 1 1 1CES 1
TASK 27-26-51-400-001
Installation of the Yaw Damper Servo Actuator (3CC1) and (3CC2)
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : PRESSURIZE ONLY THE HYDRAULIC SYSTEM(S) THAT IS (ARE) NECESSARY FOR
_______ THE TASK. ISOLATE THE OTHER HYDRAULIC SYSTEM(S) BEFORE YOU SUPPLY HYDRAULIC POWER TO THE AIRCRAFT.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
No specific drainage container
No specific warning notices
No specific adjustable access platform 6.0 m (19 ft. 8 in.)
No specific Torque Wrench : range 0.20 to 3.60 m.daN
(2.00 to 26.00 lbf.ft)
98D27207516000 1 RIGGING PIN SET R 98D27207549000 1 PIN - RIGGING
