5.
Component Description
_____________________
A. COM/NAV Radio Management Panel (RMP)
(1) Description The radio management panel (RMP) is a rectangular case.
(a) Front face
**ON A/C 001-049, 051-099, 101-105,
(Ref. Fig. 005)
R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
(Ref. Fig. 005A)
1EFF : ALL 1 23-13-00Page 4 1 1 Aug 01/05 1 1 1CES 1
Radio Management - Communication Architecture Figure 002
1EFF : 1 1R 1CES ALL 1 11 1 23-13-00 Page 5 Aug 01/03
Radio Management - Navigation Architecture Figure 003
1EFF : 1 1R 1CES ALL 1 11 1 23-13-00 Page 6 Aug 01/03
R R Radio Management - System Power Supply Figure 004
R 1EFF : 1 1 1CES ALL 1 111 23-13-00 Page 7 Aug 01/03
RMP - Front Face Figure 005
R 1EFF : 1 1 1CES 001-049, 051-099, 101-105, 1 111 23-13-00 Page 8 May 01/05
RMP - Front Face
Figure 005A
R 1EFF : 106-149, 151-199, 201-299, 301-399, 1 23-13-00Page 9 1401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C ALL
The face features:
-2 display windows wich have Liquid Crystal Displays (LCD) with a high contrast:
*
1 ACTIVE frequency display window for frequencies output by the RMP.
*
1 STBY/CRS (standby/course) display window for preset frequencies (and courses for the VOR and the ILS)
-1 transfer pushbutton switch (double arrow) which permits the transfer of frequencies from one display to the other
-5 pushbutton switches with selection feedback for the selection of the VHF and HF systems.
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-217,
-
1 SEL indicator light (white LED) to indicate the interactions between the different RMPs.
-
1 dual selector knob for frequency and course setting
-2 pushbutton switches with selection feedback for the selection of specific modes :
R **ON A/C 106-149, 218-299, 301-399, 401-499,
-
1 SEL indicator light (white LED) to indicate the interactions between the different RMPs.
-
1 dual "turbo tuning" selector knob permits frequency and course setting proportionally to its rotation speed.
-2 pushbutton switches with selection feedback for the selection of specific modes :
**ON A/C ALL
.AM pushbutton switch for the HF system .BFO pushbutton switch for the ADF system (this pushbutton switch is not used on the RMP2) (if installed)
-1 NAV pushbutton switch with selection feedback, protected by a grid-type guard. This pushbutton switch permits the selection of the radio-navigation back up mode
1EFF : ALL 1 23-13-00Page 10 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-217,
-4 pushbutton switches with selection feedback for the selection of the radio navigation systems (VOR, ILS, ADF (if installed) and a provision) The pushbutton switch corresponding to the ADF2 system is not used on the RMP2.
R **ON A/C 106-149, 218-299, 301-399, 401-499,
-4 pushbutton switches with selection feedback for the selection of the radio navigation systems (VOR, LS, ADF (if installed) and a provision) The pushbutton switch corresponding to the ADF2 system is not used on the RMP2.
**ON A/C ALL
-1 ON/OFF latching switch to set the RMP to ON and to OFF.
(b) Back The back is equipped with a round 55-pin connector.
**ON A/C 001-049, 051-099, 101-101, 201-203,
(2) Characteristics
(a) Frequency ranges
-VHF: 118 to 136.975 MHz
Channel width: 25 KHz
The KHz figure is not given.
R **ON A/C 102-149, 151-199, 204-299, 301-399, 401-499,
(2) Characteristics
(Ref. Fig. 006)
(a) Frequency ranges
-VHF: 118 to 136.975 MHz Channel width: 8,33 KHz or 25 KHz according to the pin prog The KHz figure is not given with 25 KHz spacing.
1EFF : ALL 1 23-13-00Page 11 1 1 Aug 01/05 1 1 1CES 1
RMP - Channelling/Frequency pairing (118.000 to 136.975 MHz) with 8.33 KHz
actived
Figure 006
R 1EFF : 062-099, 102-149, 151-199, 204-299, 1 Page 1223-13-00
1301-399, 401-499, 1 Aug 01/05
1 1
1CES 1
**ON A/C ALL
-HF: narrow band 2.8 to 23.999 MHz or wide band 2 to 29.999 MHz, according to the pin prog. Channel width: 1 KHz or 100Hz according to the pin prog.
NOTE : For narrow band, the frequencies between 2 and 2.799 are
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM Communications 通讯1(83)
