REFERENCE DESIGNATION
-------------------------------------------------------------------------------
**ON A/C 151-199, 201-210,
23-32-00-991-001-A Fig. 201B R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
3. Job Set-up
__________ R Subtask 23-32-00-865-052-A
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
2000VU PRAM 2RX 01 E
Subtask 23-32-00-010-050
B. Get Access
(1) Put the access platform in position at zone 128.
(2) Open the access door 824. R
4. Procedure
_________
**ON A/C 001-049, 051-099, 101-105,
(Ref. Fig. 201/TASK 23-32-00-991-001)
**ON A/C 106-149, 211-299, 301-399,
(Ref. Fig. 201A/TASK 23-32-00-991-001-B)
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 23-32-00Page 202 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1
Replacement of the Audio Cassettes
Figure 201/TASK 23-32-00-991-001
R 1EFF : 001-049, 051-099, 101-105, 1 23-32-00Page 203 1 1 May 01/05 1 1 1CES 1
Replacement of the Audio Cassettes
Figure 201A/TASK 23-32-00-991-001-B
R 1EFF : 106-149, 211-299, 301-399, 1 23-32-00Page 204 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 151-199, 201-210,
(Ref. Fig. 201B/TASK 23-32-00-991-001-A) **ON A/C 001-049, 051-099, 101-105,
Subtask 23-32-00-869-052
A. Replacement of the Audio Cassettes
(1)
Remove the PRAM reproducer.
(a)
Loosen the nuts (3) at the front of the rack (2).
(b)
Lower the nuts (3) from the lugs (7).
(c)
Pull the PRAM reproducer (8) on its rack (2) to disconnect the electrical connectors (1).
(d)
Remove the PRAM reproducer (8).
(2)
Disengage the latches (5) and open the doors (4) on the two sides of the reproducer (8).
(3)
Remove the audio cassettes (9) from the cassette drives.
(4)
Install the new audio cassettes (9) in the cassette drives. NOTE : Make sure that the identification label on each audio cassette
____ agrees with the identification label on the doors next to each cassette drive (6). Make sure that you can see the identification label on the cassettes after installation.
(5)
Close the doors (4) on the two sides of the PRAM reproducer (8) and let the latches (5) engage.
(6)
Install the PRAM reproducer
(a)
Install the PRAM reproducer (8) on its rack (2).
(b)
Engage the nuts (3) on the lugs (7) and tighten them.
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 23-32-00Page 205 1201-210, 1Aug 01/05 1 1 1CES 1
Loading of a new Announcement/Boarding Music R Figure 201B/TASK 23-32-00-991-001-A
R 1EFF : 151-199, 201-210, 1 23-32-00Page 206 1 1 May 01/05 1 1 1CES 1 **ON A/C 106-149, 211-299, 301-399,
Subtask 23-32-00-869-052-B
A. Replacement of the Audio Cassettes
(1)
Release the quick-release fastener (4) and open the door (3) on the front of the PRAM reproducer (1).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM Communications 通讯1(151)