曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
(Airport Surveillance Radar [ASR] and Precision
Approach Radar [PAR]) but is also used to provide
vectors in conjunction with published nonradar
approaches based on radio NAVAIDs (ILS, MLS,
VOR, NDB, TACAN). Radar vectors can provide
course guidance and expedite traffic to the final
approach course of any established IAP or to the
traffic pattern for a visual approach. Approach
control facilities that provide this radar service will
operate in the following manner:
8/5/04 AIM
Arrival Procedures 5−4−3
(a) Arriving aircraft are either cleared to an
outer fix most appropriate to the route being flown
with vertical separation and, if required, given
holding information or, when radar handoffs are
effected between the ARTCC and approach control,
or between two approach control facilities, aircraft
are cleared to the airport or to a fix so located that the
handoff will be completed prior to the time the
aircraft reaches the fix. When radar handoffs are
utilized, successive arriving flights may be handed
off to approach control with radar separation in lieu
of vertical separation.
(b) After release to approach control, aircraft
are vectored to the final approach course (ILS, MLS,
VOR, ADF, etc.). Radar vectors and altitude or flight
levels will be issued as required for spacing and
separating aircraft. Therefore, pilots must not deviate
from the headings issued by approach control.
Aircraft will normally be informed when it is
necessary to vector across the final approach course
for spacing or other reasons. If approach course
crossing is imminent and the pilot has not been
informed that the aircraft will be vectored across the
final approach course, the pilot should query the
controller.
(c) The pilot is not expected to turn inbound
on the final approach course unless an approach
clearance has been issued. This clearance will
normally be issued with the final vector for
interception of the final approach course, and the
vector will be such as to enable the pilot to establish
the aircraft on the final approach course prior to
reaching the final approach fix.
(d) In the case of aircraft already inbound on
the final approach course, approach clearance will be
issued prior to the aircraft reaching the final approach
fix. When established inbound on the final approach
course, radar separation will be maintained and the
pilot will be expected to complete the approach
utilizing the approach aid designated in the clearance
(ILS, MLS, VOR, radio beacons, etc.) as the primary
means of navigation. Therefore, once established on
the final approach course, pilots must not deviate
from it unless a clearance to do so is received from
ATC.
(e) After passing the final approach fix on
final approach, aircraft are expected to continue
inbound on the final approach course and complete
the approach or effect the missed approach procedure
published for that airport.
2. ARTCCs are approved for and may provide
approach control services to specific airports. The
radar systems used by these centers do not provide the
same precision as an ASR/PAR used by approach
control facilities and towers, and the update rate is not
as fast. Therefore, pilots may be requested to report
established on the final approach course.
3. Whether aircraft are vectored to the appropriate
final approach course or provide their own
navigation on published routes to it, radar service is
automatically terminated when the landing is
completed or when instructed to change to advisory
frequency at uncontrolled airports, whichever occurs
first.
5−4−4. Advance Information on Instrument
Approach
a. When landing at airports with approach control
services and where two or more IAPs are published,
pilots will be provided in advance of their arrival with
the type of approach to expect or that they may be
vectored for a visual approach. This information will
be broadcast either by a controller or on ATIS. It will
not be furnished when the visibility is three miles or
better and the ceiling is at or above the highest initial
approach altitude established for any low altitude IAP
for the airport.
b. The purpose of this information is to aid the
pilot in planning arrival actions; however, it is not an
ATC clearance or commitment and is subject to
change. Pilots should bear in mind that fluctuating
weather, shifting winds, blocked runway, etc., are
conditions which may result in changes to approach
information previously received. It is important that
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:
AIM航空信息手册2004上(184)