• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-30 15:15来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

B.  Apply electrical power.
C.  Position flight director controller switches and controls (P7 panel) as follows: MODE SEL - HDG All Others - OFF Course Counter - 000 Heading Control - Position HSI heading marker under lubber line.
D.  Verify that autopilot P7 panel is disengaged.
E.  Position HSI transfer switches (P7 panel) to RADIO.
F.  Position /RMI VOR/ADF switches (P1 and P3 panels) to VOR.
G.  Position DME mode selector on VHF NAV control panels (P8 panel) to STBY.
H.  Position VHF NAV transfer switch (P5 panel) to NORMAL.
I.  Position COMPASS transfer switch (P5 panel) to NORMAL.
NOTE:  Throughout the trouble shooting NORMAL position of transfer switch implies captain on 1 and first officer on 2.
5C8 34-31-0 Jan 20/83 Page 102
BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.

5C8 
Jan 20/83  34-31-0 
Page 103 
BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details. 


T53963 T53976 T53985
507 
34-31-0 Page 104  BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  Aug 15/78 


507 
Aug 15/78  BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  34-31-0 Page 105 


501 
34-31-0 Page 106  BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  Aug 15/78 

 

VOR/ILS NAVIGATION SYSTEM - ADJUSTMENT/TEST
EFFECTIVITY

GJ ALL EXCEPT B-2509 and B-2510
1.  VOR/GS Navigation System Test
A.  Equipment and Materials
(1)  Ramp and Bench Test Set - Collins Type 972Q-4, or Instrument Flight Research Type NAV-401L
B.  Prepare to Test System
(1)  
Provide electrical power and energize panels P6 and P18.

(2)  
Check that circuit breakers for following systems are closed: compass, flight director, instrument, interphone, and VOR/ILS navigation systems.

(3)  
Position VHF NAV transfer switch to NORMAL. Check that captain's HSI nav data source annunciator indicates 1 and first officer's indicates 2.

(4)  
Position NAV transfer switches to RADIO. Check that both HSI VOR/ILS/NAV annunciators indicate VOR/ILS.

(5)  
Set selected course to 000.

(6)  
Set compass system to indicate a heading of 0 degree.

(7)  
Check that autopilot system is not in radio mode.

(8)  
Select heading mode of operation for flight director mode selector.

(9)  
Position RMI VOR/ADF switches to VOR.


C.  Test VOR/ILS System
(1)  Test VOR/ILS System Self-Test Function
(a)  
Tune No. 1 VOR/ILS system to local VOR station and check that station identification code is audible over flight interphone system.

(b)  
Select 108.0 MHz on captains VHF NAV control panel. Check that captain's ADI and HSI glide slope flags and pointers are out of view and that HSI VOR/LOC (NAV) flag is in view.

(c)  
Actuate VOR self-test for No. 1 system while verifying following on captain's instruments: 1) HSI VOR/LOC and RMI narrow pointer flags remain in view for 3 seconds,


retract from view, and 20 +5 seconds after initiating test, reappear and remain in
view. 2) HSI course deviation bar is centered. 3) HSI to/from pointer indicates from. 4) Both VOR RMI narrow pointers indicate 180 +3 degrees.
(d)  
Select 108.1 MHz on captain's VHF NAV control panel. Verify following on captain's instruments: 1) ADI and HSI glide slope flags and pointers appear. 2) RMI narrow pointers stow at 3 o'clock.

(e)  
Actuate up/left ILS self-test for No. 1 system while verifying following on captain's instruments: 1) VOR/LOC, RUNWAY and GS flags remain in view for 3 seconds, retract from

view, and 20 +5 seconds after initiating, reappear and remain in view.

(f)  
Repeat step (e) for down/right ILS self-test.


5C8
Feb 01/95 34-31-0 Page 501
BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.


(g)  Repeat steps (a) thru (g) for the No. 2 VOR/ILS system.
(2)  
Test VOR Flag Circuit Function

(a)  
Tune No. 1 and 2 VOR/ILS systems to local station (use test set if station is not present or signal is not adequate).

(b)  
Open VOR No. 1 circuit breaker. Check that captain's HSI VOR/LOC flag comes into view.

(c)  
Close VOR No. 1 circuit breaker.

(d)  
Position VHF NAV transfer switch to BOTH ON 1.

(e)  
Open VOR No. 1 circuit breaker. Check that both HSI VOR/LOC flags appear.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737 AMM 飞机维护手册 导航 NAVIGATION 2(17)