(a)
If you find a scratch,
-determine the extent of the damaged area (Ref. SRM 52-30-00),
-remove the damage when it is less than the limit (Ref. SRM 51-73-00).
-When the scratch is larger than the limit, repair the affected fitting (Ref. SRM 52-30-00) or replace it (Ref. CMM 52-31-12).
(b)
If you find a crack, repair it immediately (Ref. SRM 51-73-00).
(c)
If you find corrosion
-determine the extent of the corroded area (Ref. SRM 52-30-00),
-remove the damage when it is less than the limit (Ref. SRM 51-74-00).
(2)
Remove the actuator safety locks and close the cargo door to get access to the inspection area "B" (Ref. TASK 52-30-00-860-002).
(3)
Examine the piano hinge fittings on the outer side of the cargo door for scratches, cracks and corrosion (inspection area "B").
(a)
If you find a scratch,
-determine the extent of the damaged area (Ref. SRM 52-30-00),
-remove the damage when it is less than the limit (Ref. SRM 51-73-00).
-When the scratch is larger than the limit, repair the affected fitting (Ref. SRM 52-30-00) or replace it (Ref. CMM 52-31-12).
(b)
If you find a crack, repair it immediately (Ref. SRM 51-73-00).
(c)
If you find corrosion
-determine the extent of the corroded area (Ref. SRM 52-30-00),
-remove the damage when it is less than the limit (Ref. SRM 51-74-00).
1EFF : ALL 1 52-31-11Page 624 1 1 May 01/05R 1 1 1CES 1
5. Close-up
________ Subtask 52-31-11-865-066
A. Make sure that this(these) circuit breaker(s) is(are) closed:
1MJ, 3801GX, 3802GX, 3803GX
Subtask 52-31-11-410-065
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Make sure that the cargo door is closed and locked correctly (Ref. TASK 52-30-00-860-002).
(3)
Remove the access platform(s).
R 1EFF : ALL 1 52-31-11Page 625 1 1 May 01/05 1 1 1CES 1 TASK 52-31-11-200-005
Detailed Visual Inspection of the Locking Hooks and Fork Fittings of the FWD Cargo Compartment Door
1. Reason for the Job
__________________
Refer to the MPD TASK: 523109-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific lint-free cloth No specific masking paper No specific masking tape No specific access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-002 USA MIL-PRF-680 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) (Ref. 20-31-00)
Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-006 AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
R 1EFF : ALL 1 52-31-11Page 626 1 1 May 01/05 1 1 1CES 1 C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-73-11-300-002 Repair of Minor Damage on Titanium, Forged Aluminum, or Steel Components 51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and Composite Material 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump
52-31-21-000-001 Removal of the Locking Handle Mechanism
52-31-21-000-007 Removal of the Locking Unit
SRM 51-73-00
SRM 51-74-00
SRM 52-30-00
**ON A/C 001-049, 053-099, 101-105, 151-199, 201-220,
52-31-11-991-018-A Fig. 604
**ON A/C 051-052,
52-31-11-991-018 Fig. 604A
R **ON A/C 106-149, 221-299, 301-399, 401-499,
52-31-11-991-018-B Fig. 604B
1EFF : ALL 1 52-31-11Page 627 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门4(68)
