(14)
Measure the distance 'a' on the door actuator (90).
-Make sure that the distance 'a' is more than 7.6 mm (0.2992 in.).
(15)
Open the cargo door (Ref. TASK 52-30-00-860-001) and make sure that the door opening angle is correct.
(16)
If the door opening angle is less then 135 deg. adjust the length of the both door actuator as follows:
NOTE : A full rotation (360 deg.) of piston rod (90) increases the
____
opening angle to 1 deg.
(a) Close the cargo door until it is in the vertical position.
1EFF : ALL 1 52-31-11Page 565 1 1 May 01/05 1 1 1CES 1
(b)
Turn the piston rod (90) of both door actuators with the same quantity of rotation to get the correct opening angle.
(c)
Open the cargo door and make sure that the door opening angle is between 135 deg. and 136 deg.
(17)
TORQUE the nut (92) to between 12.5 and 14.5 m.daN (92.18 and 106.93 lbf.ft).
(18)
Safety the nuts (92) and the locking devices (91) with MISCELLANEOUS (Material No. 19-010).
(19)
TORQUE the nuts (82) to between 1 and 1.35 m.daN (88.49 and 119.46 lbf.in) and safety it with the new cotter pins (81).
(20)
Install the bolts (86), the washers (87), the bonding jumpers (88) and the nuts (89) on the eye-end (93). (Ref. TASK 20-28-00-912-004).
5. Close-up
________ Subtask 52-31-11-865-059
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1MJ, 3801GX, 3802GX, 3803GX
Subtask 52-31-11-410-061
B. Close Access
(1)
Close and lock the cargo door (Ref. TASK 52-30-00-860-002).
(2)
Remove the access platform(s).
1EFF : ALL 1 52-31-11Page 566 1 1 May 01/05 1 1 1CES 1 DOOR - CARGO COMPARTMENT - INSPECTION/CHECK
___________________________________________
TASK 52-31-11-200-001
Detailed Visual Inspection of FWD Cargo Compartment Door (Internal Structure)
1. Reason for the Job
__________________
Refer to the MPD TASK: 523103-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific lint-free cloth
No specific masking paper
No specific masking tape
No specific 1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R Material No. 09-013 USA MIL-PRF-81733 TYPE I CLASS A R CORROSION INHIBITING BRUSH CONSISTENCY R (Ref. 20-31-00)
Material No. 11-002 USA MIL-PRF-680
DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT)
(Ref. 20-31-00)
Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-006 AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-007 AIB TN 10138 TYPE II GRADE 1 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
1EFF : ALL 1 52-31-11Page 601 1 1 May 01/05 1 1 1CES 1 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 15-008 AIB TN 10138 TYPE II GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
20-28-00-912-001 Electrical Bonding of Components with Rivets
51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and
Composite Material 51-76-11-300-001 Repair of the Sealing 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump 52-31-11-100-001 Cleaning/Painting of the FWD Cargo-Compartment Door 52-31-13-000-001 Removal of the Lining and the Insulation 52-31-13-400-001 Installation of the Lining and the Insulation SRM 51-73-00 SRM 51-74-00 SRM 52-30-00 SRM 52-73-00
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门4(63)
