826 826AR 52-32-21826 826AR 52-32-21826 826AR 52-32-21826 826AR 52-32-21826 52-32-31826 826AR 52-35-13
R 1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-32-00Page 11 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
AFT Cargo-Compartment Door - Component Location
Figure 002C
R 1EFF : 151-199, 1 52-32-00Page 12 1 1 Aug 01/05 1 1 1CES 1R AFT Cargo-Compartment Door - Component Location R Figure 002D
R 1EFF : 401-499, 1 52-32-00Page 13 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 051-052,
A. AFT Cargo-Compartment Door
-------------------------------------------------------------------------------FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA | | | | DOOR | REF.
-------------------------------------------------------------------------------DOOR STRUCTURE 825 52-32-00 VENT DOOR 826 52-32-22 DOOR SUSPENSION 826 52-32-12 LINING AND INSULATION 826 52-32-13
32WV PROXIMITY SWITCH 826 52-71-12
34WV PROXIMITY SWITCH 826 52-71-12 DOOR SEAL 826 52-32-18 VENT DOOR MECHANISM 826 826AR 52-32-21 LOCKING UNIT 826 826AR 52-32-21 SWITCH MECHANISM 826 826AR 52-32-21 INTERLOCK MECHANISM 826 826AR 52-32-21 DRIFT PIN MECHANISM 826 826AR 52-32-21 FLAP MECHANISM 826 826AR 52-32-21 LOCKING HANDLE 826 826AR 52-32-21 LATCH AND STOP FITTINGS 826 52-32-31
12MJ PROXIMITY SWITCH 825 825AR 52-35-13
**ON A/C ALL
3. Description
___________
The AFT cargo- compartment door (referred to as cargo door) is a hollow
alloy construction with a structure of sheet metal and machined parts.
The door-to-fuselage connection is of piano hinges which transmit the load
of the cargo door to the fuselage.
To adapt the belly fairing contour to the fuselage contour the cargo door
has a fairing mounted on the forward section.
R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
The latching hooks of the manually operated latching mechanism keep each cargo door in the closed position. The lock cams of the locking mechanism engage with the latching hooks when the cargo doors are correctly locked.
To show this condition there are indication windows in the access panel of each cargo door. The green mark on each lock cam shows that the locking
1EFF : ALL 1 52-32-00Page 14 1 1 Aug 01/05 1 1 1CES 1 mechanism blocks each latching unit in its latched position. The red marks show that the latching units are not blocked and satisfactory.
When the cargo door is locked, the door seal makes the related cargo compartment pressure-tight. To balance the difference in pressure on the ground and in the cargo compartment, there is a vent door in the cargo door. This spring-loaded vent door opens inboard and remains in this position until the cargo door is correctly locked.
The interlock mechanism blocks the latching mechanism in the unlatched position when the cargo door is not closed. Then the door handle is not movable and the latching hooks stay in the lifted position. The door actuators use hydraulic pressure from the door hydraulic system to open and close the cargo doors. They have an internal locking mechanism to keep the cargo door safely in the fully open position.
The proximity switches of the door warning system (circuit WV) monitor the closed and locked condition of the cargo door. They send a signal to the Electronic Centralized Aircraft Monitoring (ECAM) system when a cargo door is not locked. Then the master caution lights in the cockpit come on and the data is shown on the DOOR page of the ECAM display.
The external indications which show that a cargo door is not correctly
locked and latched are:
-
the vent door stays in open position,
-
the door handle stays away from the outer contour of the cargo door,
-
the red mark of each cam lock is in view through the indication windows.
**ON A/C 051-052,
The locking hooks of the manually operated locking mechanism keep each cargo door in the closed position. The cams of the safety mechanism engage with the locking hooks when the cargo doors are correctly locked.
To show this condition there are indication windows in the access panel of each cargo door. The green mark on each safety cam shows that the safety mechanism locks each locking unit in its latched position. The red marks show that the locking units are not locked and satisfactory.
When the cargo door is locked, the door seal makes the related cargo compartment pressure-tight. To balance the difference in pressure on the ground and in the cargo compartment, there is a vent door in the cargo door. This spring-loaded vent door opens inboard and remains in this position until the cargo door is correctly locked.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门4(163)
