• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 23:54来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 1EFF : ALL 1 52-31-00Page 501 1 1 Feb 01/98 1 1 1CES 1


 3. Job Set-up
__________
 Subtask 52-31-00-010-051

 A. Get Access
 (1)
 Make sure that the cargo door is closed (Ref. TASK 52-30-00-860-002).

 (2)
 If necessary, put the access platform in position below the closed cargo door.

 (3)
 Open the access panel 134AR to get access to the selector of the control panel.


R  (4) Remove the access panel 825AR. Subtask 52-31-00-865-050
 B. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU HYDRAULIC/HYD POWER/Y 3803GX N30 122VU DOORS/CARGO 1MJ T12 123VU Y HYD/ELEC/PUMP 3802GX AB06 123VU Y HYD/ELEC/ELEC PUMP/NORM 3801GX AB03
 Subtask 52-31-00-860-051
 C. Aircraft Maintenance Configuration
 (1)
 Make sure that the aircraft electrical circuits are energized (Ref. TASK 24-41-00-861-002).

 (2)
 Do the EIS start procedure (Upper ECAM DU and lower ECAM DU only) (Ref. TASK 31-60-00-860-001).

 (3)
 Make sure that the Yellow hydraulic system reservoir is pressurized (Ref. TASK 29-14-00-614-002).


 1EFF : ALL 1 52-31-00Page 502 1 1 Nov 01/03 1 1 1CES 1


 4. Procedure
_________ R **ON A/C 001-049, 053-061, 101-105, 201-203,
 Subtask 52-31-00-710-050-A
 A. Do this test:
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the FWD cargo door:  On the FWD cargo door:
 - push the handle flap in and pull the door handle away from the recess of the door structure.  - the vent door opens inboards,- the drift pins retract from thepockets of the fuselage,- you can see the red mark on each safety cam through the indication window.
 On the lower ECAM DU:
 - the symbol of the FWD cargo door is shown in amber and the measage CARGO comes on.
 On the FWD cargo door:
 - move the door handle fully up to the UNLOCKED position.  - the latching hooks disengage from thelatch fittings, - the cargo door starts to open because of the force of gravity.
 2. On the control panel:  On the FWD cargo door:
 - move the selector to the OPEN  - the door actuators extend and the
 position and hold it.  cargo door moves in the open direction.
 - release the selector.  - the cargo door stops and stays in this position.
 - set the selector in the OPEN position again and hold.  - the cargo door moves in the opendirection.
 On the control panel:

 1EFF : ALL 1 52-31-00Page 503 1 1 May 01/05 1 1 1CES 1


 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
3. On the FWD cargo door:
-examine the cargo door during the movement.
4. On the control panel:
-release the selector when the green indicator light is on.
-move the selector in the CLOSE direction and hold it.
-set the selector to the fully CLOSE position and hold it.
-release the selector when the cargo door is in a position in which you can do an interlock mechanism check.
 5. On the FWD cargo door:
-start to move the door handle from the UNLOCKED to the LOCKED position.
-press the roller lever of the interlock mechanism outboards.
-move the door handle down to the LOCKED position.
-
the green indicator light comes on when the door actuators are extended and locked.

On the FWD cargo door:

-
the cargo door must open smoothly andeasily.

On the FWD cargo door:

-
the cargo door stays in the fullyopen position.

 On the control panel:

-
the selector is not in the CLOSEposition.

 -
the green indicator light goes off as soon as the door actuators are not in their locked position.

 On the FWD cargo door:

-
the door actuators retract and thecargo door moves in the close direction.

-
the cargo door stops and remains inthis position.


On the FWD cargo door:
-you can not move the door handlebecause the interlock mechanismblocks the cam of the locking shaft.
-
the blockage of the latching shaft isreleased.

-
the latching hooks move to theirlocked position,


R 1EFF : 001-049, 053-061, 101-105, 201-203, 1 52-31-00Page 504 1 1 May 01/05 1 1 1CES 1
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM DOORS 舱门4(31)