-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
R **ON A/C 106-149, 221-299, 301-399, 401-499,
52-31-11-991-009-A Fig. 503B **ON A/C 001-049, 053-099, 101-105, 151-199, 201-220,
52-31-11-991-010 **ON A/C 051-052, Fig. 504
R 52-31-11-991-010-B Fig. 504A **ON A/C 106-149, 221-299, 301-399, 401-499,
52-31-11-991-010-A Fig. 504B **ON A/C 001-049, 053-099, 101-105, 151-199, 201-220,
52-31-11-991-011 **ON A/C 051-052, Fig. 505
R 52-31-11-991-011-B Fig. 505A **ON A/C 106-149, 221-299, 301-399, 401-499,
52-31-11-991-011-A Fig. 505B **ON A/C 001-049, 053-099, 101-105, 151-199, 201-220,
52-31-11-991-030 Fig. 506
1EFF : ALL 1 52-31-11Page 515 1 1 Aug 01/05 1 1 1CES 1 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R **ON A/C 106-149, 221-299, 301-399, 401-499,
52-31-11-991-030-A Fig. 506A
**ON A/C 001-049, 053-099, 101-105, 151-199, 201-220,
52-31-11-991-012 Fig. 507
**ON A/C 051-052,
52-31-11-991-012-B Fig. 507A R **ON A/C 106-149, 221-299, 301-399, 401-499,
52-31-11-991-012-A Fig. 507B R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
52-31-11-991-025 Fig. 508
**ON A/C 051-052,
52-31-11-991-025-A Fig. 508A
**ON A/C ALL
3. Job Set-up
__________
Subtask 52-31-11-010-058
A. Get Access
(1)
Open the FWD cargo-compartment door (referred to as cargo door) and install the actuator safety locks (Ref. TASK 52-30-00-860-001).
(2)
Put the access platform in position at the cargo door.
1EFF : ALL 1 52-31-11Page 516 1 1 Aug 01/05 1 1 1CES 1 Subtask 52-31-11-865-054
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU HYDRAULIC/HYD POWER/Y 3803GX N30 122VU DOORS/CARGO 1MJ T12 123VU Y HYD/ELEC/PUMP 3802GX AB06 123VU Y HYD/ELEC/ELEC PUMP/NORM 3801GX AB03
R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 52-31-11-010-059
C. Get Access
(1)
Remove the lining and insulation (Ref. TASK 52-31-13-000-001) to get access to the drift pin mechanism.
(2)
Remove the access panel 825AR to get access to the latching and locking mechanism.
**ON A/C 051-052,
Subtask 52-31-11-010-059-A
C. Get Access
(1)
Remove the lining and insulation (Ref. TASK 52-31-13-000-001) to get access to the drift pin mechanism.
(2)
Remove the access panel 825AR to get access to the locking mechanism.
1EFF : ALL 1 52-31-11Page 517 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
4. Procedure
_________ R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 52-31-11-820-052
A. Adjustment of the Door Handle
**ON A/C 001-049, 053-099, 101-105, 151-199, 201-220,
(Ref. Fig. 503/TASK 52-31-11-991-009) R **ON A/C 106-149, 221-299, 301-399, 401-499,
(Ref. Fig. 503B/TASK 52-31-11-991-009-A) R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
(1)
Move the door handle of the open cargo door to the LOCKED position as follows:
(a)
Press the roller lever of the interlock mechanism outboard to release the blockage of the latching shaft.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM DOORS 舱门4(52)