1EFF : ALL 1 27-84-00Page 619 1 1 Nov 01/01R 1 1 1CES 1
TASK 27-84-00-210-002
Check of Slat Transmission Shafting Integrity Including Inspection of Seal Witness Drains
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific flashlight No specific mirror No specific safety barriers No specific warning notice No specific access platform 1.5 m (4 ft. 11 in.) No specific adjustable access platform 4.0 m (13 ft. 1 in.)
1EFF : ALL 1 27-84-00Page 620 1 1 Nov 01/01R 1 1 1CES 1
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-026 GB DEF-STAN 68-148/1 R SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
Material No. 15-007 AIB TN 10138 TYPE II GRADE 1 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-81-51-000-001 Removal of the Slat Wing-Tip Brake 27-81-51-400-001 Installation of the Slat Wing-Tip Brake 32-00-00-481-001 Installation of the Safety Devices on the Landing
Gears
32-12-00-010-001 Open the Main Gear Doors for Access
32-12-00-410-001 Close the Main Gear Doors after Access
27-84-00-991-004 Fig. 606
27-84-00-991-005 Fig. 607
27-84-00-991-006 Fig. 608
3. Job Set-up
__________
(Ref. Fig. 606/TASK 27-84-00-991-004)
Subtask 27-84-00-941-054
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Make sure that the ground safety locks are installed on the landing gear (Ref. TASK 32-00-00-481-001).
(3)
Put the warning notice in position to tell persons not to pressurize the hydraulic systems.
(4)
Put a warning notice in position to tell persons not to operate the landing gear doors.
Slat Transmission - Access Panels Figure 606/TASK 27-84-00-991-004
1EFF : 1 1R 1CES ALL 1 11 1 27-84-00 Page 622 Nov 01/01
Subtask 27-84-00-020-050
B. Remove the Safety Collar
(1) Remove the safety collar from the circuit breakers 9CV and 11CV.
Subtask 27-84-00-865-057
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/SLT/CTL AND MONG/SYS1 5CV B06 121VU FLIGHT CONTROLS/WTB/SLT/SYS2 11CV P19 121VU FLIGHT CONTROLS/SLT/CTL/SYS2 7CV R21 122VU FLIGHT CONTROLS/WTB/SLT/SYS1 9CV S06
Subtask 27-84-00-010-053-A
D. Get Access
(1)
Open the MLG doors (Ref. TASK 32-12-00-010-001).
(2)
Make sure that the GROUND LOCK SLEEVE is installed on each MLG door actuating cylinder.
(3)
Put the access platform in the applicable MLG bay.
(4)
Put the adjustable access platform in position below the applicable zone 521(621) and 522(622).
(5)
Open the applicable access panels:
-
for the left wing, open 191EB, 191KB, 521AT, 521CB, 521EB, 521GB, 521HB, 522AB, 522CB, 522EB, 522FB, 522LB, 522NB, 522QB, 522SB, 522UB
-
for the right wing, open 192EB, 192KB, 621AT, 621CB, 621EB, 621GB, 621HB, 622AB, 622CB, 622EB, 622FB, 622LB, 622NB, 622QB, 622SB, 622UB.
1EFF : ALL 1 27-84-00Page 623 1 1 Nov 01/01R 1 1 1CES 1
4. Procedure
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵7(97)
