(2)
Remove the access platform(s).
(3)
Make sure that the work area is clean and clear of tool(s) and other items.
Subtask 27-80-00-860-062
C. Aircraft Configuration
(1)
Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER from the flap/slat control lever on the panel 114VU.
(2)
De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
Subtask 27-80-00-942-059
D. Close-up
(1)
Remove the warning notice(s).
(2)
Remove the safety barriers.
(3)
Make sure that the work area is clean and clear of tool(s) and other items.
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
TASK 27-80-00-866-006
Reset of the Torque Limiters of the Slat System on the Ground
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific safety barriers
No specific warning notice(s)
No specific access platform 4 m (13 ft. 1 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 27-84-00-710-001 Operational Test of the Slat System 29-10-00-863-003 Pressurize the Blue Hydraulic System with a Ground
Power Supply 29-10-00-864-003 Depressurize the Blue Hydraulic System
1EFF : ALL 1 27-80-00Page 221 1 1 Nov 01/01R 1 1 1CES 1
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C 001-049, 051-061, 101-105, 151-152, 201-204,
27-80-00-991-002 Fig. 202 R **ON A/C 062-099, 106-149, 153-199, 205-299, 301-399, 401-499,
27-80-00-991-002-A Fig. 202A
**ON A/C ALL
3. Job set up
__________
Subtask 27-80-00-941-055
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Put the warning notice(s) in position to tell persons not to operate the slat system.
Subtask 27-80-00-010-050
B. Get Access
(1)
Put the access platform in position below the applicable access panel.
(2)
Remove the applicable access panel(s) to gain access to the torque limiter(s):
for the slat No.1 Torque Limiters:
521CB, 521EB
621CB, 621EB
for the slat No.2 Torque Limiters:
522AB, 522CB
622AB, 622CB
for the slat No.3 Torque Limiters:
522FB, 522HB, 522JB, 522KB
622FB, 622HB, 622JB, 622KB
for the slat No.4 Torque Limiters:
522NB, 522QB
622NB, 622QB
for the slat No.5 Torque Limiters:
522SB, 522UB
622SB, 622UB.
Subtask 27-80-00-865-061
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/FLP/CTL AND MONG/SYS1 6CV B07 121VU FLIGHT CONTROLS/FLP/CTL AND/MONG/SYS2 8CV Q21
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵7(41)
