-
FOR 6012CM, 6062CM (Ref. TASK 27-84-45-000-005) and (Ref. TASK 27-84-45-400-006)
-
FOR 6014CM, 6064CM, 6028CM, 6078CM, 6036CM, 6086CM, 6038CM, 608, 6040CM, 6090CM, 6042CM, 6092CM, 6044CM, 6094CM (Ref. TASK 27-54-45-000-006) and (Ref. TASK 27-84-45-400-007)
-
FOR 6016CM, 6066CM, 6020CM, 6070CM, 6026CM, 6076CM, 6030CM, 608 (Ref. TASK 27-84-45-000-007) and (Ref. TASK 27-84-45-400-008)
-
FOR 6018CM, 6068CM (Ref. TASK 27-84-45-000-008) and (Ref. TASK 27-84-45-400-009)
-
FOR 6022CM, 6072CM (Ref. TASK 27-84-45-000-009) and (Ref. TASK 27-84-45-400-010)
-
FOR 6024CM, 6074CM (Ref. TASK 27-84-45-000-010) and (Ref. TASK 27-84-45-400-011)
-
FOR 6032CM, 6082CM (Ref. TASK 27-84-45-000-011) and (Ref. TASK 27-84-45-400-012)
-
FOR 6034CM, 6084CM (Ref. TASK 27-84-45-000-012) and (Ref. TASK 27-84-45-400-013)
-
FOR 6046CM, 6096CM (Ref. TASK 27-84-45-000-013) and (Ref. TASK 27-84-45-400-014).
1EFF : ALL 1 27-84-00Page 634 1 1 Nov 01/01R 1 1 1CES 1
(b) Replace the applicable steady bearing:
-
FOR 6007CM, 6057CM (Ref. TASK 27-84-44-000-001) and (Ref. TASK 27-84-44-400-001)
-
FOR 6017CM, 6067CM, 6019CM, 6069CM (Ref. TASK 27-84-44-000-002) and (Ref. TASK 27-84-44-400-002)
-
FOR 6021CM, 6071CM (Ref. TASK 27-84-44-000-003) and (Ref. TASK 27-84-44-400-003)
-
FOR 6023CM, 6073CM (Ref. TASK 27-84-44-000-004) and (Ref. TASK 27-84-44-400-004)
-
FOR 6025CM, 6075CM (Ref. TASK 27-84-44-000-005) and (Ref. TASK 27-84-44-400-005)
-
FOR 6031CM, 6081CM (Ref. TASK 27-84-44-000-006) and (Ref. TASK 27-84-44-400-006).
(c) Replace the applicable wing-tip brake 35CV(36CV) (Ref. TASK 27-81-51-000-001) and (Ref. TASK 27-81-51-400-001).
5. Close-up
________ Subtask 27-84-00-860-055
A. Aircraft Maintenance Configuration
(1)
De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
(2)
De-pressurize the Yellow and Blue Hydraulic systems (Ref. TASK 29-24-00-864-001) and (Ref. TASK 29-10-00-864-003).
(3)
De-pressurize the Green Hydraulic system (Ref. TASK 29-23-00-864-001).
Subtask 27-84-00-410-056
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the applicable access panels:
-
for the left wing, close 191BB, 191BT, 191EB, 191KB, 521AB, 521CB, 521EB, 521GB, 521HB, 522AB, 522CB, 522EB, 522FB, 522JB, 522KB, 522LB, 522NB, 522QB, 522SB, 522UB
-
for the right wing, close 192BT, 192CT, 192EB, 192FB, 192KB, 621AB, 621CB, 621EB, 621GB, 621HB, 622AB, 622CB, 622EB, 622FB, 622JB, 622KB, 622LB, 622NB, 622QB, 622SB, 622UB.
Subtask 27-84-00-942-061
C. Close Access
(1)
Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER from the flap/slat control lever.
(2)
Remove the safety barriers.
(3)
Remove the warning notice(s).
(4)
Remove the access platform(s).
(5)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
GEARBOX - BEVEL 19 DEG (6003CM) - REMOVAL/INSTALLATION
______________________________________________________
TASK 27-84-41-000-001
Removal of the Bevel Gearbox 6003CM
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______ CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
1. Reason for the Job__________________ Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific warning notice No specific access platform 2.1 m (6 ft. 11 in.) 98D27504030001 1 LOCK-TORQUE SHAFT (FLAPS AND SLATS) WITH CLAMP-PIVOT 98D27803000000 1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵7(101)
