A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵7(69)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R  11. On the MCDU: - push the line key < RETURN frequently until the SYSTEM REPORT/TEST - F/CTL menu is shown. 
R  12. Make sure that the WTBs are not set. 
R  13. On the panel 49VU: - open the circuit breakers 5CV and 6CV (flap and slat system 1). 
R  14. On the panel 121VU: - close the circuit breakers 7CV and 8CV (flap and slat system 2). 
R  15. Use the SFCC 2 to do this test again. 
R  16. On the MCDU: - push the line key < RETURN frequently until the CFDS menu is shown. 
R  17. On the panel 49VU: - close the circuit breakers 5CV and 6CV (flap and slat system 1). 
R  18. Set the Slat and Flap control lever to the position 0. 

R 1EFF : 301-399, 1 27-81-00Page 535 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL

 5. Close-up
________ Subtask 27-81-00-865-069
 A. Make sure that this(these) circuit breaker(s) is(are) closed:
 5CV, 6CV, 7CV, 8CV

 Subtask 27-81-00-860-060-A
 B. Aircraft Configuration
 (1)
 Stop operation of the engines:

 (a)
 Decrease both engines to MIN IDLE for five minutes.

 (b)
 Do the Engine Shutdown Procedure (Ref. TASK 71-00-00-710-027) or (Ref. TASK 71-00-00-710-028).

 

 (2)
 De-pressurize the Green, Yellow and Blue hydraulic systems (Ref. TASK 29-10-00-864-001), (Ref. TASK 29-10-00-864-002) and (Ref. TASK 29-10-00-864-003).

 (3)
 Depressurize the applicable hydraulic reservoirs (Ref. TASK 29-14-00-614-001).

 (4)
 De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).

 (5) Close the circuit breaker 2WW. Subtask 27-81-00-942-059
 C. Removal of Equipment
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the warning notice(s).

 (3)
 Remove the safety barriers.

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 27-81-00Page 536 1 1 Aug 01/05R 1 1 1CES 1

 TASK 27-81-00-820-001 Manual Adjustment of the Position Pick-Off Units WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-51-00-820-001 Manual Adjustment of the Position Pick-Off Units
 3. Job Set-up
__________ Subtask 27-81-00-941-055
 A. Safety Precautions
 (1) Put the safety barriers in position.

 4. Procedure
_________ Subtask 27-81-00-820-050
 A. Manual Adjustment of the Position Pick-Off Units
 (1) Set the mechanical zero position of the Position Pick-Off Unit (Ref. TASK 27-51-00-820-001).
 5. Close-up
________ Subtask 27-81-00-942-055
 A. Removal of Equipment
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the safety barriers.

 (3)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 

 POSITION PICK OFF UNIT - ASYMMETRY (APPU) (31CV,32CV) - REMOVAL/INSTALLATION
____________________________________________________________________________
 TASK 27-81-18-000-001
 Removal of the Asymmetry-Position Pick-Off Unit 31CV (32CV)
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵7(69)