曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Compatibility with Jet A fuel was examined by Eastern Airlines Engineering Laboratories. Analysis indicated that
fuel containing Kathon FP 1.5 biocide at 4 times the recommended level complies with the requirements of ASTM
D1655 and DERD 2494. Kathon FP 1.5 biocide also complies with ASTM D4054, Part B and D975. Testing by
S.E.C.L.F. showed no effect on fuel properties.
2. Filter Coalescers – Velcon:
Kathon FP 1.5 did not affect coalesced water drop size at four times the recommended use level. Soak tests in
treated fuel did not reveal any deterioration of components. Testing was carried out by Velcon.
B. Airframe Fuel Systems :
Boeing Commercial Airplane Group tested fuel treated with Kathon FP 1.5 biocide at 4 times the recommended use
level and found it to be compatible with the following airframe fuel system components.
1. Integral fuel tank coatings and substrates
7075- T6
4130 Steel
Titanium 6A1-4V – ASTM4967/MIL-T-9046
6 coatings
2. Elastomers
Fluorocarbon MIL-R-83248
Fluorosilicone MIL-R-25988
Buna N MIL-R-6855
Polyurethane BTC 86
Polyurethane BTC 69
Testing done by S.E.C.L.F. showed no effect on the elastomer properties
3. Sealants
PRO SEAL 890 Class A-2
PR 1440 Class A-2/B-2
C. Compatibility with Engines:
Rolls Royce conducted a thorough test of Kathon FP 1.5 biocide, focusing on the following parameters:
1. Hot end corrosion of super alloys
2. Fuel thermal stability
3. Solubility
4. Corrosion of fuel system components (cold)
· Results showed that Kathon FP 1.5 biocide “does not present a hazard to engine performance and
integrity”. Rolls Royce concluded that Kathon FP 1.5 is “satisfactory for use.”
· Testing done by S.E.C.L.F. showed no effect on engine performance.
Kathon FP 1.5 Approvals 3 of 5 FQS 106-06 04/06
D. Airframe Approval Status:
1. Airframe Manufacturers
Boeing Approved for use in all Boeing planes and all
engine types 737,737-300/400/500, 737-
600/700/800/900, 747-400, 757, 767, and 777
Dornier Luftfarht GmbH Fully approved.
British Aerospace Approved for military aircraft.
McDonnell-Douglas Approved for all McDonnell Douglas Heritage
Airplanes. DC-8, DC-9, MD-80, MD-90, DC-10,
MD-10, MD-11, and 717 Series
Airbus Fully approved.
Fokker Approved for F28 & F100.
Dassault Approval Pending
Bell Helicopter Approval Pending
2. Engine Manufacturers:
Rolls Royce Approved for all civil aircraft engines. Approvals
certified by the CAA. Approved for all turbine
engines.
General Electric Approved for all commercial aircraft engines. See
GE Fuel Specification (D50TF2)
Pratt & Whitney Approved for all JT3C, JT3D, JT4A, JT8D, JT9D,
JT12/A/JFTD12A, PW2000, PW4000, F117-PW-
100.
Pratt & Whitney Canada Approved for all Turbo Fans JT15D engine
models . PT6-3, 3B, 3D per 5144 Rev 14 dated May
2005. For additional engine models , see your
Service Bulletin or Maintenance Manual for
approval information.
SNECMA Approved for all civil and military engines.
CFM International No objection to use at 100 ppm.
Raytheon Aircraft Company (Honeywell) Hawker aircraft equipped with Honeywell 731
series engines
Honeywell (RJ Engine Manufacturer) Approved use concentration of 100ppm by weight
for use on 146/RJ by BAE Systems
Approved for turbine engines; turbofan,
turboprop and turbo shaft.
Gulfstream See Maintenance Manual, Chapter 12; Approved
Fuel Additives
Turbomecca Pending
3. Auxiliary Power Units (APU):
Allied-Signal Fully approved.
P&W Canada Approved for all Turbo Fans JT15D engine models
Garrett APF Fully Approved
APIC Fully approved for APS 2000 APU.
Kathon FP 1.5 Approvals 4 of 5 FQS 106-06 04/06
4. Airlines Approved use:
United Airlines
Continental
US Air
American Airlines
Southwest Airlines
Frontier Airlines
North American Airlines
UPS Air Cargo
Northwest Airlines
ATA Airlines
5. Military Aviation Approvals:
French Air Force
British Royal Air Force
Czech Republic Air Force
6. Other Pending Approvals:
British Airways
Armee de L’Air (France)
7. Filters
Velcon Approved
Raycor Pending
Faudi Pending
Facet Pending
E. Other Aviation Approvals:
IATA:
Kathon FP 1.5 is listed in the IATA Publication, “Guidance Material on Microbiological
Contamination in Aircraft Tanks”.
Kathon FP 1.5 Approvals 5 of 5 FQS 106-06 04/06
SUITABLE MATERIALS FOR CONTACT WITH KATHON FP 1.5 (as supplied):
Metals Plastics Elastomers FRP / Coatings
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料34(13)
