ATA OPERATIONS Area INSPECTIONS
1st
25 hrs 50
hrs 100
hrs Major Ann. Other
79-00 LUBRICATION
79-00 General
79-00 1) Visually inspect the lubrication lines and connections on the engine cases and on the oil cooler(s), check the attach fittings and look for impact marks, wear, cracks and leaks. 100 X X X 0 NOTE 1
79-10 Storage
79-10 1) Visually inspect the engine oil filler port, the oil gage and the base for leaks, and check attach fittings. 100 X X
79-20 Oil distribution
79-20 1) Visually inspect oil cooler(s), support(s),
attach fittings. Look for cracks and evidence of leaks. 100 X X
79-20 2) Check engine crankcase breather for
obstruction. 100 X X 0 NOTE 1
79-30 Indicating
79-30 1) Visually inspect attach fittings, lines,
connections, pressure transmitter and oil temperature probe for routing and condition. 000 X X 0 NOTE 1
80-00 STARTING
80-00 General
80-00 1) Visually inspect the starter relay (battery at the rear), check the attach fittings, the lugs and the terminal covers. 200 X
80-00 2) Perform an overhaul of the starter. 100 Associated
with
engine
overhaul
NOTE 1 : If a 100-hr. inspection has been carried out during the last 3 months, do not perform the operations identified with a "0" unless the annual inspection replaces a 100-hr. inspection. For US registered aircraft, perform all operations.
AHAA
Validity : S / N 1 - 9999 05 20-01Page 246
(IA) JUN 01
ATA OPERATIONS Area INSPECTIONS
1st
25 hrs 50
hrs 100
hrs Major Ann. Other
80-00 3) Visually inspect the starter, the attach
fittings and the connections. To adjust the clearance between the toothed ring and the 100 Ix xx x x xx x x xl
LYCOMING starter drive gear, refer to the
latest issue of TEXTRON LYCOMING
Service Instruction No. 1447.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 1(98)
