曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
57-20 3) Thoroughly inspect the L.H.
main-landing-gear hinged strut attachment bearing - refer to the latest issue of
SOCATA SB 10-080-57. 500 6000 Idg.
or
4000 hrs,
then 1500
Idg. or
1000 hrs
57-20 4) Visually inspect the L.H. spar for loose
rivets, cracks, distortion and evidence of corrosion. 500 X
57-20 5) Visually inspect the attach fittings and check the L.H. wing front attachment for cracks and evidence of corrosion. 500 X
57-20 6) Visually inspect the attach fittings and check the L.H. wing rear attachment for cracks and evidence of corrosion. 500 X
57-20 7) Visually inspect the attach fittings and check the L.H. wing main attachment spacers for cracks and evidence of corrosion. 500 X
57-20 8) Visually inspect the L.H. wing ribs and inner skin for loose rivets, cracks, distortion and evidence of corrosion. 500 X
57-20 9) Inspect the L.H. wing upper and lower surface skins for condition, inspect the
anti-skid coating and anti-wear PTFE
located at flap/wing junction for condition. 500 X X
57-20 10) Visually inspect the R.H.
main-landing-gear attachment area for loose rivets, distortion, cracks and evidence of corrosion. 600 X X 0 NOTE 1
57-20 11) Visually inspect the R.H. main-landing-gear hinged strut attachment bearing and the retraction actuator attachment fitting. 600 X X 0 NOTE 1
NOTE 1 : If a 100-hr. inspection has been carried out during the last 3 months, do not perform the operations identified with a "0" unless the annual inspection replaces a 100-hr. inspection. For US registered aircraft, perform all operations.
AHAA
Validity : S / N 1 - 9999 05-20-01P 235
(IA) JUN 01
ATA OPERATIONS Area INSPECTIONS
1st
25 hrs 50
hrs 100
hrs Major Ann. Other
57-20 12) Thoroughly inspect the R.H.
main-landing-gear hinged strut attachment bearing - refer to the latest issue of
SOCATA SB 10-080-57. 600 6000 Idg.
or
4000 hrs,
then 1500
Idg. or
1000 hrs
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 1(88)