(2)
In some procedures, it is necessary to use a powder with some form of chromic acid in it. As the result, there is a risk of fire unless you use the correct precautions. An example is alodine powder. This powder can start a fire if it touches organic solvents or materials that can burn such as paper or rags.
(3)
Some procedures, which are not given in this manual, use equivalent powders that are dangerous. Examples of these powders are chromic acid anodizing, chromium plating and Dow 17 magnesium coating. The last example is Iridite, which is an aluminum corrosion coating, MIL-C5541, alternative to alodizing.
(4)
Before you apply paint to the airplane surfaces, you must prepare the surfaces to receive the paint. The surface must be dry and free of dirt or oil. It is very important that you prepare the surfaces correctly to get the best results.
(5)
The specified paint stripers will give the best results for the usual field work. Use other strippers with cautions since these strippers can cause corrosion to aluminum, magnesium, cadmium and steel.
(6)
If the conversion coating surface is damaged, use a brush to apply alodine to the base metal for protection. Use Alodine 1200S, a clear coating, on the aluminum alloy parts but not on magnesium or magnesium alloys. If it is a magnesium surface, use Dow 19.
(7)
These safety precautions are neccessary when you use solvents, cleaners, strippers, etchants or conversion coatings:
(a)
Try not to breathe the solvent fumes. Do not use solvents in confined spaces without sufficient air or approved respiratory protection.
(b)
Try not to get solvents, cleaners, etchants or coating materials on your skin. Wear rubber or plastic gloves when you use these materials. For surfaces above the head, wear goggles or plastic face shields, rubber raincoats and rain hats.
(c)
Flush immediately with water when you get paint stripper, etchant or conversion coating material on your skin.
(d)
If these materials get in your eyes, immediately flush the eyes with water.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
51-21-00
ALL ú ú B01 Page 701 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(e) Get medical aid immediately.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
51-21-00
ALL ú ú B01 Page 702 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
PAINT STRIPPING - CLEANING/PAINTING
___________________________________
1. General_______
A. This procedure contains the task to remove the paint from the metal surfaces and Composite Substrates.
B. Paint strippers or solvents are used to remove small quantities of paint on metal surfaces. Do not use paint stripper on plastic laminations, fiberglass, aerodynamic smoother, edges of metal bonds or rubber parts. Use only approved solvents for these materials.
TASK 51-21-11-107-006-B00
2. Paint Stripping (Fig. 701)_______________
A. Standard Tools and Equipment
(1)
Wood or Plastic Scraper (Commercially available)
(2)
Clothing - Protective
B. Consumable Materials
(1)
G00217 Sponge
(2)
G00034 Cheesecloth - Dry and Lint-Free
(3)
G00371 Brush - Soft Bristle
(4)
G00500 Brush - Stiff Bristle
(5)
G00117 Tape - Aluminum Foil, Permacel P112
(6)
G00291 Tape - Conductive, Scotch No. 425 (Aluminum Foil)
(7)
G00365 Paper, Plastic Coated per VV-P-272C
(8)
G00252 Sheet - Polyethylene
(9)
G00111 Sheeting - Plastic Film Mylar
(10)
E00043 Alcor - Organic, LO-2030M
(11)
E00044 Cee Bee - Organic, A-228D
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 结构 STRUCTURES(11)
