• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-10-29 12:27来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

Make sure the SYSTEM light is off.

 (g)  
Set the left engine start switch to the AUTO position.


 S 865-900-001
 (2)  Open the circuit breaker on the main power distribution panel, P6, and attach DO-NOT-CLOSE tags:
 (a)  
6C1, FUEL COND CONT L

 (b)  
Make sure the SYSTEM light goes off.


 S 865-901-001
 (3)  Open the circuit breaker on the overhead circuit breaker panel, P11, and attach a DO-NOT-CLOSE tag:
 (a)  
11D19, ENGINE START CONT LEFT

 (b)  
Remove the DO-NOT-CLOSE tag and close this P11 panel circuit breaker: 1) 11D20, ENGINE START CONT RIGHT

 (c)  
Make sure the L and R FUEL CONT switch is set to the CUTOFF position.


 
 GUN 001-008, 010, 101 PRE-EO B531006;  ú 31-31-00
 GUN 009  ú CONFIG 1 ú 05 Page 503 ú Sep 28/01

A

757
MAINTENANCE MANUAL

 (d)  
At the pilots overhead panel, set the right engine start switch on the engine start/RAT control panel to the GND position.

 (e)  
Make sure the SYSTEM light is off.

 (f)  
Set the right engine start switch to the AUTO position.

 (g)  
Make sure the SYSTEM light comes on.


 S 865-902-001
 (4)  Open the circuit breaker on the main power distribution panel, P6, and attach DO-NOT-CLOSE tags:
 (a)  
6C2, FUEL COND CONT R

 (b)  
Make sure the SYSTEM light goes off.


 S 865-903-001
 (5)  Open the circuit breaker on the overhead panel, P11, and attach DO-NOT-CLOSE TAG:
 (a)  11D20, ENGINE START CONT RIGHT
 G. BITE Test
 S 735-608-001
 (1)  Do the BITE test that follows:
 (a)  
Set the FDEP function switch to the ON position.

 (b)  
Make sure the BITE indicator on the DFDAU is off.

 (c)  
Set the function switch to the NORM position.

 (d)  
Make sure the SYSTEM light comes on.

 (e)  
Make sure the SYSTEM, FDEP, DFDR, and DFDAU indicators on the FDEP are off.


 H. EICAS MESSAGE TEST
 S 735-609-001
 (1)  Do the EICAS message test that follows:
 (a)  
Open these circuit breakers on the overhead panel, P11, and attach DO-NOT-CLOSE tags: 1) 11K9, LEFT ENGINE OIL PRESS 2) 11K35, RIGHT ENGINE OIL PRESS

 (b)  
Make sure these circuit breakers on the overhead panel, P11, are closed: 1) 11D19, ENGINE START CONT LEFT 2) 11D20, ENGINE START CONT RIGHT

 (c)  
Remove the DO-NOT-CLOSE tags and close the P6 panel circuit breakers: 1) 6C1, FUEL COND CONT L 2) 6C2, FUEL COND CONT R
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 仪表 CHAPTER 31 - INSTRUMENTS 1(57)