GUN (10) Remove the diskete when COMP light on the data loader illuminate. GUN GUN S 864-091 GUN (11) On the front panel of the cable assembly, select toggle switch to GUN DMU position. GUN GUN S 864-092 GUN (12) Turn the rotary switch to DMU PDL ENABLE position. GUN GUN S 404-093 GUN (13) Insert software diskette, part number 998-1617-505, into the data GUN loader. GUN (a) RDY and PROG lights will illuminate during the load. GUN (b) Time to load the diskette is approximately 6 minutes.
ú
31-31-03
ALL ú ú GUN Page 412 ú Sep 28/01
A
757
MAINTENANCE MANUAL
GUN
GUN S 014-094
GUN (14) Remove the diskette when COMP light on the data loader illuminate.
GUN
GUN S 864-095
GUN (15) Turn off the PDL.
GUN
GUN S 024-096
GUN (16) Disconnect data loader and cable assembly from the FDAMS unit.
GUN C. Verify Proper Software Load
GUN
GUN S 704-097
GUN (1) Verify that proper DFDAU software is loaded.
GUN (a) On front panel of FDAMS unit, toggle switch to the right.
GUN (b) Front panel LED display should scroll to the left and read
GUN MAND0212.
GUN (c) Toggle switch to the left.
GUN (d) Display should read 998-2023-502
GUN (e) Toggle switch to the left again.
GUN (f) Display should read 998-2025-501
GUN
GUN S 704-098
GUN (2) Verify that proper ACMS software is loaded.
GUN (a) Toggle switch on the front panel of the FDAMS unit to the
GUN right.
GUN (b) Display should read MAND0212.
GUN (c) Toggle switch to the right again.
GUN (d) Display should read TEST2904.
GUN
GUN S 714-136
GUN (3) Perform Flight Data Recorder System - Operational test, make sure
GUN the tests pass (AMM 31-31-00/501).
GUN
GUN S 864-137
GUN (4) Return the aircraft back to its normal configuration.
GUN
GUN S 864-160
GUN (5) Do the next task: "Accomplishment Instruction - Part Two".
ú
31-31-03
ALL ú ú GUN Page 413 ú Sep 28/01
A 757 MAINTENANCE MANUAL
GUN GUN TASK 31-31-03-704-159 GUN 5. GUN 001-008, 010, 101; GUN Accomplishment Instruction - Part Two
_____________________________________
GUN NOTE:____After incorporating part one, let the airplane fly two days then GUN incorporate part two. GUN GUN A. Procedure GUN GUN S 714-138 GUN (1) Use HHDLU to copy the DFDR (Ref to AMM 31-31-01/201). GUN GUN S 864-139 GUN (2) Return the aircraft back to its normal configuration.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 仪表 CHAPTER 31 - INSTRUMENTS 1(133)
