• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-10-29 12:27来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者


 NOTE: To get access to the FDR, open the lower ceiling panel No. 1
____ above the aft galley (AMM 25-22-02/401). The HHDLU can only be connected to the AlliedSignal flight data recorder (FDR).
 S 864-044
 (3)  
Supply electrical power (AMM 24-22-00/201).

 S 864-022

 (4)  
Remove the DO-NOT-CLOSE tags and close the P11 panel circuit breakers:

 (a)  
11J7, FLIGHT RECORDER AC

 (b)  
11J8, FLIGHT RECORDER DC

 (c)  
11S1, AID SENSOR

 


 S 864-045
 (5)  
Pressurize the left, right, and center hydraulic systems and hydraulic systems reservoirs (AMM 29-11-00/201).

 S 864-055

 (6)  
With the Data Signal Display Unit (DSDU), set the control switches on the tester as follows:

 (a)  
Set the power switch to the ON position.

 (b)  
Set the INPUT switch to the ARINC INPUT DATA position.

 (c)  
Set the SYNC switch to the SYNC B position.

 (d)  
Set the DATA PARAMETER/DOCUMENTARY switch to the DATA PARAMETER position.

 (e)  
Set the OCTAL DISPLAY switch to the 12 BIT position.

 (f)  
Set the SUBFRAME and WORD as specified.

 


 
 GUN 001-008, 010, 101 POST-EO B531006;  ú 31-31-10
 GUN 051, 102-999  ú ú 11 Page 405 ú Sep 28/01

A

757
MAINTENANCE MANUAL

 S 864-056
 (7)  With the Teledyne tester (P/N 2222786), set the switches on the tester as follows:
 (a)  
Set the POWER switch to the ON position.

 (b)  
Set the READOUT switch to the ACTF DATA position.

 (c)  
Set the UPDATE switch to the AUTO position.

 (d)  
Set the DFDAU/DFDR DATA SELECTOR switch to the DFDAU position.

 (e)  
Set the DATA switch to the 12 BIT position.

 (f)  
Set the SUBFRAME and WORD as specified.


 S 864-057
 (8)  With the Teledyne tester (P/N 2229738), set the switches on the tester as follows:
 (a)  
Push the CLR switch two or three times to clear all inputs.

 (b)  
Push the DFDR switch and then the ENT switch.

 (c)  
Set the SUBFRAME and WORD as specified.


 S 864-058
 (9)  With the hand-held download unit (HHDLU), do the steps that follow:
 NOTE: These steps are for airplanes equipped with AlliedSignal FDR
____
 only.

 (a)  
On the flight recorder control panel (FRCP), set the function switch to the ON position.

 (b)  
Push the red button on top of the HHDLU.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 仪表 CHAPTER 31 - INSTRUMENTS 1(152)