• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-10-29 12:27来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (d)  
Push the FUN switch, then the number 03 for SUBFRAME.

 (e)  
Set a subframe (1 thru 4) on the keyboard switch.

 (f)  
Push the DATA switch, then the number 04 for WORD.

 (g)  
Set a word (1 thru 64) on the keyboard.

 (h)  
Push the FUN switch, then the number 02 to set the FORMAT field on the tester.

 (i)  
Push the number 02 to set the OCTAL 10 on the tester.

 (j)  
Set the SUBFRAME and WORD as specified.


 S 864-055
 (10)
 GUN 001-008, 010, 101 PRE-EO B531006; GUN 009;
 Set the SUBFRAME to 0 and the WORD to 50.


 S 864-067

 (11)
 GUN 001, 010, 101 POST-EO B531006;
 GUN 051, 102-999;
 Set the SUBFRAME 0 and the WORD to 2.

 

 (a) Make sure the tester display is between 3442 and 3706.
 F. Put the airplane back to the usual condition.
 S 864-090
 (1)  If you used the HHDLU, do the steps that follow:
 (a)  
Set the function switch on the flight recorder control panel to the NORM position.

 (b)  
Push the red button on top of the HHDLU.

 (c)  
Remove the HHDLU adapter cable from the flight data recorder.

 (d)  
Install the test plug to the test connector at the flight data recorder.


 S 864-091
 (2)  If you used test equipment other than the HHDLU, do the steps that follow:
 (a)  
Turn the tester off.

 (b)  
Open these P11 panel circuit breakers:
 1) 11J7, FLIGHT RECORDER AC
 2) 11J8, FLIGHT RECORDER DC


 (c)  
Disconnect the tester from the right side of the P61 panel.

 (d)  
Install the test plug to the test connector at the P61 panel.


  ú

 31-31-05
 ALL  ú ú 08 Page 406 ú Sep 28/01

A

757
MAINTENANCE MANUAL

 (e)  Close these P11 panel circuit breakers:
 1) 11J7, FLIGHT RECORDER AC
 2) 11J8, FLIGHT RECORDER DC

 S 864-046
 (3)  Remove electrical power if it is not necessary (AMM 24-22-00/201).
  ú

 31-31-05
 ALL  ú ú 04 Page 407 ú Sep 28/01

A

757 MAINTENANCE MANUAL
 CONTROL COLUMN POSITION TRANSDUCER - REMOVAL/INSTALLATION
_________________________________________________________
 1.  General_______
 A.  There are two tasks in this procedure. The first task is the removal of the control column position transducer. The second task is the installation of the control column position transducer.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 仪表 CHAPTER 31 - INSTRUMENTS 1(139)