ABNORMAL OPERATIONS
GENERAL
A318/A319/A320/A321
FLIGHT CREW TRAINING MANUAL
METHOD
If QRH shows a ΔVREF
VAPP computation principle with ΔVREF
(1) For ΔVREF ≤ 10 kt: apply speed increment to the VAPP and/or additional factor to the landing distance if applicable (See (2) and See (3) )
(2) Multiply the landing distance by an additional factor of 1.1
ABNORMAL OPERATIONS
GENERAL
A318/A319/A320/A321
FLIGHT CREW TRAINING MANUAL
(3) In CONF 3, add another 5 kt speed increment and multiply the landing distance by an additional factor of 1.2 (instead of 1.1)
Then, if landing in CONF 3 is required, select CONF 3 on the MCDU (this ensures proper operation of the GPWS).
When fully configured in final approach, the crew will check the reasonableness of the final approach speed computed by the crew with regard to VLS on the PFD speed scale.
If the QRH shows no ΔVREF:
The flight crew can use the MCDU VAPP, as computed by the FMS (the FMS takes systematically into account the use of A/THR).
IN FLIGHT LANDING DISTANCE CALCULATION FOLLOWING FAILURES
Applicable to: ALL
GENERAL
The actual landing distance (from 50 ft above the runway surface until the aircraft comes to the complete stop) is measured during specific flight tests for the certification of the aircraft. This distance represents the absolute performance capability of the aircraft. It is published without safety margin under the name "LANDING DISTANCE WITHOUT AUTOBRAKE" in the QRH.
To compute the actual landing distance following any failure affecting the landing performance, the crew multiplies the "LANDING DISTANCE WITHOUT AUTOBRAKE" CONFIGURATION FULL by: ‐ The LDG DIST Factor following the failure, and
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A318/A319/A320/A321 机组训练手册 FCTM Flight Crew Training Manual(126)
