F 『
E C F M E
E E
E 56 E
E E
Loss of the LPTC Torque Motor Control through the two Channels on Engine 1
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
73-29-00-810-892 Loss of LPTC Torque Motor Control through the Channel A on Engine 1 73-29-00-810-893 Loss of LPTC Torque Motor Control through the Channel B on Engine 1 AMM 73-29-00-710-040 Operational Test of the FADEC on the ground (with Engine Motoring)
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the FADEC 1A and 1B on the ground (with engine motoring) (Ref. AMM TASK 73-29-00-710-040).
4. Fault Isolation
_______________
A. If the test gives the maintenance messages J7, HMU (LPTCTM), ECU and J8, HMU (LPTCTM), ECU:
- do the following troubleshooting procedures (Ref. TASK 73-29-00-810-892) and (Ref. TASK 73-29-00-810-893).
F 『R EEFF : 106-149, 155-199, 208-299, 301-399, E ∞∞73-29-00∞∞∞∞∞∞∞∞∞∞Page A293
E E401-499, Aug 01/05 E E ECES
E TASK 73-29-00-810-915
F 『
E C F M E
E E
E 56 E
E E
Loss of the LPTC Torque Motor Control through the two Channels on Engine 2
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
73-29-00-810-894 Loss of LPTC Torque Motor Control through the Channel A on Engine 2 73-29-00-810-895 Loss of LPTC Torque Motor Control through the Channel B on Engine 2 AMM 73-29-00-710-040 Operational Test of the FADEC on the ground (with Engine Motoring)
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the FADEC 2A and 2B on the ground (with engine motoring) (Ref. AMM TASK 73-29-00-710-040).
4. Fault Isolation
_______________
A. If the test gives the maintenance messages J7, HMU (LPTCTM), ECU and J8, HMU (LPTCTM), ECU:
- do the following troubleshooting procedures (Ref. TASK 73-29-00-810-894) and (Ref. TASK 73-29-00-810-895).
F 『R EEFF : 106-149, 155-199, 208-299, 301-399, E ∞∞73-29-00∞∞∞∞∞∞∞∞∞∞Page A294
E E401-499, Aug 01/05 E E ECES
E TASK 73-29-00-810-916
F 『
E C F M E
E E
E 56 E
E E
Loss of the HPTC Torque Motor Control through the two Channels on Engine 1
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
73-29-00-810-872 Loss of the HPTC Torque Motor Control through the Channel A on Engine 1 73-29-00-810-873 Loss of the HPTC Torque Motor Control through the Channel B on Engine 1 AMM 73-29-00-710-040 Operational Test of the FADEC on the ground (with Engine Motoring)
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the FADEC 1A and 1B on the ground (with engine motoring) (Ref. AMM TASK 73-29-00-710-040).
4. Fault Isolation
_______________
A. If the test gives the maintenance messages J7, HMU (HPTCTM), ECU and J8, HMU (HPTCTM), ECU:
- do the following troubleshooting procedures (Ref. TASK 73-29-00-810-872) and (Ref. TASK 73-29-00-810-873).
F 『R EEFF : 106-149, 155-199, 208-299, 301-399, E ∞∞73-29-00∞∞∞∞∞∞∞∞∞∞Page A295
E E401-499, Aug 01/05 E E ECES
E TASK 73-29-00-810-917
F 『
E C F M E
E E
E 56 E
E E
Loss of the HPTC Torque Motor Control through the two Channels on Engine 2
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 发动机燃油和控制 2(149)
