「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞52-41-00∞∞∞∞∞∞∞∞∞∞Page 211
Nov 01/03 CES
R R R R (4) If the fault continues: - replace the SDAC-2 (1WV2) (Ref. AMM TASK 31-55-34-000-001) and (Ref. AMM TASK 31-55-34-400-001).
B. Test
(1) On the ECAM control panel: - push the DOOR key to get the DOOR/OXY page.
(2) Make sure that the aft AVIONIC indication and the door symbol come into view green.
5. Close-up________
A. Put the aircraft back to its initial configuration.
(1) On the ECAM control panel, set the UPPER DISPLAY and LOWER DISPLAY potentiometers to OFF.
(2) De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002).
TASK 52-41-00-810-809
Closing of the FWD Avionics Compartment Door Not Possible
1. Possible Causes
_______________
- locking rod
- roller
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
CMM 524131 AMM 52-41-11-000-001 Removal of the Avionics-Compartment Forward Door AMM 52-41-11-400-001 Installation of the Avionics-Compartment Forward Door
3. Fault Confirmation
__________________
A. Job Set-up
(1) Put the access platform in position in the zone 121/122.
B. Test
(1) Make sure that the FWD avionics compartment door cannot be closed.
4. Fault Isolation
_______________
A. If the test confirms the fault:
- remove the FWD avionics compartment door (811) (Ref. AMM TASK 52-41-11-000-001).
(1) Do a check and repair the locking rod or the roller (Ref. CMM 524131).
(2) Install the FWD avionics compartment door (811) (Ref. AMM TASK 52-41-11-400-001).
TASK 52-41-00-810-810
Closing of the L Avionics Compartment Door Not Possible
1. Possible Causes
_______________
- locking rod
- roller
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
CMM 524132 AMM 52-41-12-000-001 Removal of the Avionics-Compartment Lateral-Left Door AMM 52-41-12-400-001 Installation of the Avionics-Compartment Lateral-Left
Door
3. Fault Confirmation
__________________
A. Job Set-up
(1) Put the access platform in position in the zone 125.
B. Test
(1) Make sure that the L avionics compartment door cannot be closed.
4. Fault Isolation
_______________
A. If the test confirms the fault:
- remove the L avionics compartment door (812) (Ref. AMM TASK 52-41-12-000-001).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320 Trouble Shooting Manual 排故手册 舱门 DOORS(116)