A. Start the RH engine (Ref. AMM TASK 71-00-00-710-003).
(1) Look for fault indications on the upper ECAM DU and the lower ECAM DU.
R (2) Shut down the RH engine (Ref. AMM TASK 71-00-00-710-028).
4. Fault Isolation
_______________
A. If the fault confirmation gives:
- the message HYD B+Y SYS LO PR on the upper ECAM DU. do the fault isolation procedure (Ref. TASK 29-12-00-810-805) and (Ref. TASK 29-13-00-810-805).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞29-10-00∞∞∞∞∞∞∞∞∞∞Page 203
Nov 01/99 CES
TASK 29-10-00-810-804
External Leakage found on Components of the Hydraulic System
1. Possible Causes_______________
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R R R AMM AMM 29-00-00-280-006 29-00-00-790-001 Check of the Green or Yellow Hydraulic System after Operation in a Possible Cavitation Condition of the Engine Pump Check of the External Leaks of the Hydraulic Components
3. Fault Confirmation__________________
A. Do a check of external leakage of the related component (Ref. AMM TASK 29-00-00-790-001).
R R R R R R R NOTE : Do the check of the Green or Yellow hydraulic system after____ operation in a possible cavitation condition of the engine pump if the hydraulic engine pump of the related hydraulic system has operated for more than 5 minutes: - with closed engine pump fire valves and/or - with the RSVR LO LVL warning on the upper ECAM DU (Ref. AMM TASK 29-00-00-280-006).
4. Fault Isolation_______________
A. If the fault confirmation gives that the leakage is out of tolerance: - repair or replace the component as necessary.
B. Do the check as given in Para. 3. A. to make sure that no leakage occurs.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞29-10-00∞∞∞∞∞∞∞∞∞∞Page 204
Aug 01/02 CES
TASK 29-10-00-810-805
Reservoir Fluid Level Indication replaced by amber XX for all Hydraulic Systems
1. Possible Causes
_______________
R - quantity indicator of the Green hydraulic reservoir R - quantity indicator of the Blue hydraulic reservoir R - quantity indicator of the Yellow hydraulic reservoir
- wiring
- C/B-HYDRAULIC/HYD/QTY/IND (1831GQ)
- terminal block (7502VT)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 24-41-00-861-002
R AMM 29-11-41-000-002 R R AMM 29-11-41-400-002 R R AMM 29-12-41-000-002 R R AMM 29-12-41-400-002 R R AMM 29-13-41-000-003 R R AMM 29-13-41-400-003 R R AMM 29-31-00-710-001
AMM 31-60-00-860-001 AWM 29-31-02
3. Fault Confirmation
__________________Energize the Aircraft Electrical Circuits from the External Power Removal of the Quantity Indicator of the Green Hydraulic Reservoir Installation of the Quantity Indicator of the Green Hydraulic Reservoir Removal of the Quantity Indicator of the Blue Hydraulic Reservoir Installation of the Quantity Indicator of the Blue Hydraulic System Removal of the Quantity Indicator of the Yellow Hydraulic Reservoir Installation of the Quantity Indicator of the Yellow Hydraulic Reservoir Functional Check of Reservoir Low Level WarningEIS Start Procedure
A. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU HYDRAULIC/HYD/QTY/IND 1831GQ P35
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞29-10-00∞∞∞∞∞∞∞∞∞∞Page 205
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 液压(13)
