822.
(2)
Make sure that the access door 822 is open.
(3)
Make sure that the protective cover is removed from the battery power center 105VU.
1EFF : ALL 1 34-12-12Page 404 1 1 Feb 01/98 1 1 1CES 1 Subtask 34-12-12-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06 105VU ADIRS/ADIRU1/28VDC 6FP1 C02
**ON A/C 001-049, 051-061, 101-105, 201-203,
121VU ADIRS/ADIRU/2/115VAC 4FP2 N07 121VU ADIRS/ADIRU/3/115VAC 4FP3 N06 121VU ADIRS/ADIRU/2/28VDC 6FP2 N05 121VU ADIRS/ADIRU/3/28VDC 6FP3 N04
R **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
121VU ADIRS/ADIRU/2/115VAC 4FP2 N06 121VU ADIRS/ADIRU/3/115VAC 4FP3 N05 121VU ADIRS/ADIRU/2/28VDC 6FP2 N04 121VU ADIRS/ADIRU/3/28VDC 6FP3 N03
**ON A/C ALL
122VU LIGHTING/TST/BOARD/SPLY 30LP X06 122VU LIGHTING/ANN LT SPLY/XFMR/BUS 2 27LP X05 122VU LIGHTING/ANN LT SPLY/XFMR/BUS 1 26LP X04 122VU LIGHTING/INSTL LT/OVHD/PNL 3LF Y03
4. Procedure
_________
(Ref. Fig. 401/TASK 34-12-12-991-001)
Subtask 34-12-12-420-050
A. Installation of the ADIRS CDU (2FP)
(1)
Clean the component interface and/or the adjacent area.
(2)
Do an inspection of the component interface and/or the adjacent area.
1EFF : ALL 1 34-12-12Page 405 1 1 Aug 01/05 1 1 1CES 1
(3)
Remove the blanking caps from the electrical connectors (2) and (3).
(4)
Make sure that the electrical connectors are clean and in the correct condition.
(5)
Connect the electrical connectors (2) to the related receptacles (3).
(6)
Install the CDU (4) in its housing (1).
(7) Tighten the four quarter turn fasteners (5). Subtask 34-12-12-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 4FP1, 4FP2, 4FP3, 6FP1, 6FP2, 6FP3, 3LF, 26LP, 27LP, 30LP
Subtask 34-12-12-710-050
C. Do the test of the ADIRS CDU brightness and display.
(Ref. TASK 34-10-00-710-001)
5. Close-up
________ Subtask 34-12-12-860-050
A. Make sure that the work area is clean and clear of tool(s) and other items.
Subtask 34-12-12-410-050
B. Close Access
(1)
Install the protective cover on the battery power center 105VU.
(2)
Tighten the two screws.
(3)
Close the access door 822
(4)
Remove the access platform(s).
1EFF : ALL 1 34-12-12Page 406 1 1 Feb 01/00R 1 1 1CES 1
REFERENCE UNIT - AIR DATA/INERTIAL (ADIRU) (1FP1,1FP2,1FP3)
___________________________________________________________ REMOVAL/INSTALLATION
____________________ TASK 34-12-34-000-001 Removal of the ADIRU (1FP1, 1FP2, 1FP3) CAUTION : DO NOT REMOVE THE RACK OF THIS UNIT.
_______ PRECISION ADJUSTMENT IS NECESSARY TO INSTALL THE RACK CORRECTLY. THE MANUFACTURER DOES THIS ADJUSTMENT BEFORE DELIVERY OF THE AIRCRAFT.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific access platform 1.6 m (5 ft. 3 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM NAVIGATION 导航1(110)
