4 Takeoff Data (LDI) Request inhibit:
_ This option determines whether or not the uplink data and downlink requests of takeoff initialization data are allowed.
5 Wind Data (PWI) Request inhibit:
_
This option determines whether or not the uplink data and
downlink requests of predicted wind data are allowed.
6 Flight Number IEI Enable:
_
This option determines whether or not the flight number is
included within the flight plan request or progress report
downlink messages.
7 Ground Address (GA) Enable:
_
This option determines whether or not one or more ground
addresses are allowed within downlink messages.
8 Datalink Ground Addresses:
_ This element defines a list of ground addresses per designated IMIs to which a ground address is appended for a downlink message transmission.
9 Company Address (CA) Enable:
_
This option determines whether or not a company address is
allowed within downlink messages.
10 Datalink Company Addresses:
__ This element defines a list of company addresses per designated IMIs to which a company address is appended for a downlink message transmission.
11 Time Stamp (TS) Enable:
__ This option determines whether or not a Time Stamp element is transmitted for any downlink message.
12 Scratchpad (SP) Enable:
__ This option determines whether or not a "Scratch Pad" element is transmitted for manually initiated downlink message.
13 Position (POS) Report inhibit:
__ This element defines whether or not a position report can be manually downlinked.
14 Data Link PRG Report Triggers:
__ This element defines the report triggers for the automatic transmission of the progress report. The report triggers are:
-
minutes to Top of Descent Triggers (0 to 5 triggers of number of minutes to T/D)
-
minutes to Destination Triggers (0 to 5 triggers of number of minutes to destination)
-Delta ETA Trigger
15 Flight Plan (FPN/FPC) Report inhibit:
__ This element defines whether or not a flight plan report can be manually downlinked.
16 Rejection Messages Enable:
__ This option determines whether or not a Rejection message is transmitted upon detection of an error within an ACARS uplink message.
17 Response Messages Enable:
__ This option determines whether or not a Response message is transmitted for any uplinked message.
18 Request for Report Customization
__ This element defines a list of customization IEIs per designated non-standard IMIs for which a flight report is generated upon reception of an uplink request with a label that matches one in this element.
19 Auto-print of AOC uplinks:
__ This option determines whether or not the auto-printing of the flight plan initialization, takeoff and wind data uplink reports is allowed. This option, if enabled, defaults to the auto-print states selected by the following parameters and can be manually overridden via the PRINT FUNCTION page. If not enabled, auto-printing of these reports is inhibited and cannot be manually overridden.
20 Auto-print of flight plan uplink:
__ This is the default value selected for auto-printing of the flight plan initialization uplink message if the auto-print of ACARS uplinks is selected. If the auto-print of ACARS uplinks is not selected, the uplink message cannot be automatically printed and this value is ignored.
21 Auto-print of takeoff data uplink:
__ This is the default value selected for auto-printing of the takeoff data uplink message if the auto-print of ACARS uplinks is selected. If the auto-print of ACARS uplinks is not selected, the uplink message cannot be automatically printed and this value is ignored.
22 Auto-print of wind uplink:
__ This is the default value selected for auto-printing of the wind uplink message if the auto-print of ACARS uplinks is selected. If the auto-print of ACARS uplinks is not selected, the uplink message cannot be automatically printed and this value is ignored.
23 Auto-print of flight reports:
__ This option determines whether or not the auto-printing of the pre-flight, in-flight and post-flight reports is allowed. This option, if enabled, defaults to the auto-print trigger states selected by the following parameters and can be manually overridden via the PRINT FUNCTION page. If not enabled, printing of these reports is inhibited and cannot be manually overridden.
24 Auto-print at engine start:
__ This is the default value selected for auto-printing of the pre-flight report if the auto-print of flight reports is selected. If the auto-print of flight reports is not selected, the pre-flight report cannot be automatically printed and this value is ignored.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM AUTO FLIGHT 自动飞行4(75)
