R 6. If there are no INOP AUTO FLT
R indications in view, push the
R line key adjacent to the YES
R indication.
R 7. For each of the AFS/LAND
R TEST-5,6,7 and 8 procedure pages:
R - Obey the instructions given on
R the MCDU:
R - To reply YES: Push the line key
R adjacent to YES if the result
R of the visual and the aural
R checks is correct.
R - To reply NO: Push the line key
R adjacent to NO.
R
R
R
R
R
The AFS/LAND TEST-5 page comes into
view.
The AFS/LAND TEST-6,7 and 8 pages come
into view.
The TEST OK indication comes into view
on the AFS/LAND TEST-9 page.
One AFS/LAND TEST REPORT page comes
into view.
This page shows a failure indication.
To continue the test after the repair,
push the line key adjacent to the
RETURN indication (the procedure in
progress comes into view).
R NOTE : If the result of the visual and aural checks is incorrect and the____
R result of the test is correct:
R - The procedure in progress comes into view.
R 8. On the MCDU, push the line key On the MCDU:
R adjacent to the RETURN indication - The CFDS MENU page comes into view.
R until the CFDS menu page comes
R into view.
R **ON A/C 106-149, 301-399, 401-499,
Subtask 22-97-00-710-051-A
A. Do this test:
NOTE : The automatic landing capability can be deduced from these ECAM____ STATUS pages:
------------------------------------------------
|INOP indication | Automatic Landing Capability | |----------------|------------------------------| | CAT III DUAL | CAT III SINGLE | | CAT III | CAT II | | CAT II | CAT I | -------------------------------------------------
R R R NOTE : You can stop the LAND TEST when it is necessary. To stop the test,____ push the line key adjacent to the END OF TEST indication, (the AFS MAIN MENU page comes into view).
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. On the MCDU, on the AFS MAIN MENU page: - Push the line key adjacent to the LAND TEST indication (line 5R) - Select the landing mode. On the MCDU, the AFS/LAND TEST-1 pagecomes into view.
2. Make sure that the aircraft configuration is the same as given on the AFS/LAND TEST-1 page. Then push the next page function key. On the MCDU, the AFS/LAND TEST-2 pagecomes into view.If it does not come into view, and theLAND TEST REFUSED indication comes intoview, push the line key adjacent to the END OF TEST indication and do the test again.
3. Make sure that the aircraft configuration is the same as given on the AFS/LAND TEST-2 page. Then push the next page function key. The AFS/LAND TEST-3 page comes intoview.
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
4. Do the ILS FREQ/CRS or MLS The AFS/LAND TEST-4 page comes into CHAN/CRS (if MLS fitted) view. selection as given on the AFS/LAND TEST-3 page. Then push the next page function key.
NOTE : If local airport is
____
equipped with an ILS
having a frequency of
109.9, enter another
frequency which should be
also different from the
other local ILS
frequencies (if any others
are existing).
5. As indicated on the AFS/LAND TEST-4 page:
-Make sure that these INOP AUTO
FLT indications (CAT2, CAT3,
CAT3 DUAL) do not come into
view on the right part of ECAM
STATUS page.
NOTE : If the list of indications is full, an arrow comes into view at the
____ bottom on the line (between the left and the right parts of the display unit). On the ECAM control panel, push the CLR key to get the remaining indications.
6. If there are no INOP AUTO FLT The AFS/LAND TEST-5 page comes into
indications in view, push the view.
line key adjacent to the YES
indication.
7. For each of the AFS/LAND
TEST-5,6,7 and 8 procedure pages:
- Obey the instructions given on
the MCDU:
- To reply YES: Push the line key The AFS/LAND TEST-6,7 and 8 pages come
adjacent to YES if the result into view.
of the visual and the aural
checks is correct.
