曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
EICAS MAINT panel, on the right side panel, P61.
(i) Push and hold the ERASE switch, on the EICAS MAINT panel, for
approximately three seconds.
(j) Make sure the EICAS message, RSV BRAKE VAL, does not show on
the EICAS display.
(k) Manually move the pressure shutoff valve for the isolated ACMP,
in the right wheel well, to the OPEN position.
(l) Make sure the EICAS message, RSV BRAKE VAL, shows on the EICAS
display.
(m) Remove the electrical connector from the pressure shutoff valve
for the isolated ACMP.
(n) Push the ELEC/HYD, and then the AUTO EVENT READ switches on the
EICAS MAINT panel, on the P61 panel.
(o) Push and hold the ERASE switch, on the EICAS MAINT panel, for
approximately three seconds.
(p) Make sure the EICAS message, RSV BRAKE VAL, does not show on
the EICAS display.
(q) Install the electrical connector on the supply shutoff valve
for the isolated ACMP.
(r) Make sure the EICAS message, RSV BRAKE VAL, shows on the EICAS
display.
(s) Put the RESERVE BRAKE switch, on the P1 panel, in the OFF
position.
(t) Push the ELEC/HYD, and then the AUTO EVENT READ switches on the
EICAS MAINT panel, on the P61 panel.
(u) Push and hold the ERASE switch, on the EICAS MAINT panel, for
approximately three seconds.
(v) Make sure the EICAS message, RSV BRAKE VAL, does not show on
the EICAS display.
(w) Manually move the supply shutoff valve for the isolated ACMP,
in the right wheel well, to POSITION 1.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-11-00
ALL ú ú 04 Page 519 ú Jun 20/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
(x)
Make sure the EICAS message, RSV BRAKE VAL, shows on the EICAS display.
(y)
Manually move the supply shutoff valve for the isolated ACMP to POSITION 2.
(z)
Install the electrical connector on the pressure shutoff valve for the isolated ACMP. (aa) Push the ELEC/HYD, and then the AUTO EVENT READ switches on the EICAS MAINT panel, on the P61 panel. (ab) Push and hold the ERASE switch, on the EICAS MAINT panel, for approximately three seconds.
(ac) Remove the DO-NOT-CLOSE tag and close this circuit breaker on the P11 panel: 1) 11K22, RESERVE BRAKE SOURCE
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 液压 CHAPTER 29 - HYDRAULIC POWER 1(76)
