(10)
Remove the supply hose (6) from the hydraulic pump (28).
S 034-011
(11)
Remove the union (4) and the reducers (8, 11) from the ports on the hydraulic pump (28).
S 034-012
(12)
Install caps on the hydraulic lines and the ports of the hydraulic pump (28).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-11-01
ALL ú ú 02 Page 404 ú Sep 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
S 034-013
(13)
Remove the bolt (14) to disconnect the bonding jumper (16), if installed.
S 034-014
(14)
Remove the nut (19) at the bonding jumper (17).
S 034-015
(15)
Remove the bonding jumper (17) from the stud on the vibration isolator (18).
S 024-016
WARNING:_______BE CAREFUL WHEN YOU MOVE THE HYDRAULIC PUMP. BECAUSE THE HYDRAULIC PUMP WEIGHS 45 POUNDS, INJURY CAN OCCUR.
(16) Remove the bolts (24) from the hydraulic pump (28).
NOTE:____The weight of the hydraulic pump is 45 lbs. Make sure you hold the pump sufficiently when you remove the bolts (24).
S 024-017
(17)
Remove the hydraulic pump (28).
S 034-019
(18)
Remove the hydraulic pump (28) from the vibration isolators.
S 214-052
(19)
Do a check for damage on each of the vibration isolators.
S 034-053
(20)
If it is necessary to replace a vibration isolator, do the steps that follow to remove it:
(a) Remove the four bolts (22) on the vibration isolator.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 液压 CHAPTER 29 - HYDRAULIC POWER 1(175)