S 034-033
(2)
Install a cap on the opening in the filter module.
I.
Remove the Pressure Switch (Fig. 401)
S 034-034
(1) Disconnect the electrical connector from the pressure switch.
S 024-098
WARNING: BEFORE YOU DISCONNECT THE PRESSURE SWITCH, MAKE SURE YOU BLEED
_______ ALL HYDRAULIC PRESSURE LINES COMPLETELY. USE CONTAINERS AS REQUIRED TO CAPTURE RESIDUAL HYDRAULIC FLUID REMAINING IN THE UNIT.
(2)
Remove the pressure switch from the filter module.
S 034-036
(3)
Install a cap on the opening in the filter module.
TASK 29-11-18-404-037
3. Install the Filter Module and Components for the Pressure and Case Drain of___________________________________________________________________________ the Alternating Current Motor Pump (ACMP) in the Left and Right Systems_______________________________________________________________________
A. General
(1) This task contains the procedures to install the components which follow:
(a) Filter module for the pressure and case drain of the alternating current motor pump (ACMP), referred to in this procedure as the filter module
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
29-11-18
ALL ú ú 01 Page 406 ú Jan 20/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
(b)
Filter elements
(c)
Differential pressure indicators
(d)
Check valves
(e)
Pressure switch.
(2) To start one of these procedures, do the applicable group of steps that is necessary to install the component. Then, do the "Put the Airplane Back to Its Usual Condition" group of steps.
B. Consumable Materials
(1) D00054 Hydraulic System Lubricant - MCS 352
C. References
(1)
AMM 12-12-01/301, Hydraulic Systems
(2)
AMM 12-25-01/301, Exterior Cleaning
(3)
AMM 29-11-00/201, Main (Left, Right, and Center) Hydraulic Systems
(4)
AMM 32-00-15/201, Main Gear Door Locks
D. Access
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 液压 CHAPTER 29 - HYDRAULIC POWER 1(220)
