• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-10-11 13:04来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (23)
 Safety the electrical connectors (1, 2) with a lockwire.

 S 864-042

 (24)
 Remove the DO-NOT-CLOSE tags and close these circuit breakers on the overhead panel, P11:

 (a)
11K16, HYDRAULICS ELEC PUMP RIGHT

 (b)
11K25, HYDRAULICS ELEC PUMP LEFT

 


 S 864-043
 (25)
 Pressurize the applicable hydraulic system and the reservoir with the ACMP's (AMM 29-11-00/201).

 S 794-044

 (26)
 Make sure there are no leaks at the hydraulic connections while the hydraulic pump (28) is in operation.


 S 114-045
 CAUTION: QUICKLY CLEAN THE INSTALLATION AREA OF ALL HYDRAULIC
_______ FLUID. HYDRAULIC FLUID CAN CAUSE DAMAGE TO THE AIRPLANE EQUIPMENT.
 (27) Clean all hydraulic fluid from the installation area (AMM 12-25-01/301).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-11-01
 ALL  ú ú 03 Page 410 ú Sep 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

 S 614-046
 (28) Fill the applicable hydraulic reservoir (AMM 12-12-01/301).
 S 094-047 WARNING: USE THE PROCEDURE IN AMM 32-00-15/201 TO REMOVE THE DOOR LOCKS.
_______ THE DOORS OPEN AND CLOSE QUICKLY AND CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (29)
 Remove door locks from the landing gear doors and close the doors (AMM 32-00-15/201).

 S 864-048

 (30)
 Remove hydraulic power if it is not necessary (AMM 29-11-00/201).


 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 29-11-01
 ALL  ú ú 01 Page 411 ú Sep 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

 CENTER SYSTEM ALTERNATING CURRENT MOTOR PUMP (ACMP) - REMOVAL/INSTALLATION
__________________________________________________________________________
 1.  General_______
 A.  This procedure contains two tasks. One task removes the alternating current motor pumps for the center system. The other task installs the alternating current motor pumps for the center system.
 NOTE: If the ACMP is being replaced, you will be required to replace
____ only the pressure and case drain filters associated with the ACMP, (P1F and CD1F or P2F and CD2F), as marked on the filter module case. Do not replace the filters due to external pump leakage alone.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 液压 CHAPTER 29 - HYDRAULIC POWER 1(179)