Phase 2 - Detailed training
A flexible period may be allowed by the competent authorities to allow organisa-tions to set the necessary courses and impart the training to the personnel, taking into account the organisation’s training schemes/means/practices. This flexible period should not extend beyond 31 December 2010.
The persons who have already attended the Level 2 Detailed training course in compliance with ED decision 2007/001/R Appendix XII either from a M.A. Subpart G approved organisation or from a Part-147 training organisation are already in compliance with Phase 2 with the exception of continuation training.
Staff should have received Phase 2 training by 31 December 2010 or within 12 months of joining the organization, whichever comes later.
Type: Should be a more in-depth internal or external course. It should not take the form of a training bulletin or other self study. An examination should be required at the end, which should be in the form of a multi choice question, and the pass mark of the examination should be 75%.
Level: It should be a detailed course on the theoretical and practical elements of the subject.
The training may be made either:
-in appropriate facilities containing examples of components, systems and parts affected by Fuel Tank Safety (FTS) issues. The use of films, pictures and practical examples on FTS is recommended; or
-by attending a distance course (e-learning or computer based training) including a film when such film meets the intent of the objectives and content here below. An e-learning or computer based training should meet the following criteria:
-A continuous evaluation process should ensure the effectiveness of the training and its relevance;
-Some questions at intermediate steps of the training should be proposed to ensure that the trainee is authorized to move to the next step;
- The content and results of examinations should be recorded;
-Access to an instructor in person or at distance should be possible in case support is needed.
A duration of 8 hours for phase 2 is an acceptable compliance.
When the course is provided in a classroom, the instructor should be very familiar with the data in Objectives and Guidelines. To be familiar, an instructor should have attended himself a similar course in a classroom and made additionally some lecture of related subjects.
Objectives:
The attendant should, after the completion of the training:
- have knowledge of the history of events related to fuel tank safety issues and the theoretical and practical elements of the subject, have an overview of the FAA regu-lations known as SFAR (Special FAR) 88 of the FAA and of JAA Temporary Guidance Leaflet TGL 47, be able to give a detailed description of the concept of fuel tank system ALI (including Critical Design Configuration Control Limitations CDCCL, and using theoretical fundamentals and specific examples;
- have the capacity to combine and apply the separate elements of knowledge in a logical and comprehensive manner;
- have knowledge on how the above items affect the aircraft;
- be able to identify the components or parts or the aircraft subject to FTS from the manufacturer’s documentation,
- be able to plan the action or apply a Service Bulletin and an Airworthiness Directive.
Content: Following the guidelines described in paragraph E).
Continuation training:
The organisation should ensure that the continuation training is performed in each two years period. The syllabus of the training programme referred to in the Training policy of the Continuing Airworthiness Management Exposition (CAME) should con-tain the additional syllabus for this continuation training.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：CONTINUING AIRWORTHINESS REQUIREMENTS – PART M 2(75)
