8.
Place: ........................................................
9.
Date: ........................................................
Note (1) : A note giving the address(es) to which the Form(s) should be sent. Note (2) : An optional note to give information on any fees payable.
* delete as applicable
ED 2010/002/R
EASA Form 2 Page 1 of 2
ED 2010/002/R
SCOPE OF APPROVAL AVAILABLE
CLASS AIRCRAFT RATING LIMITATION BASE LINE
A1 Aeroplanes above 5700 kg [Rating reserved to Maintenance Organisations approved in accordance with Annex II (Part-145)] [State aeroplane manufacturer or group or series or type and/or the maintenance tasks] Example: Airbus A320 Series [YES/ NO]* [YES/ NO]*
A2 Aeroplanes 5700 kg and below [State aeroplane manufacturer or group or series or type and/or the maintenance tasks] Example: DHC-6 Twin Otter Series [YES/ NO]* [YES/ NO]*
A3 Helicopters [State helicopter manufacturer or group or series or type and/or the maintenance task(s)] Example: Robinson R44 [YES/ NO]* [YES/ NO]*
A4 Aircraft other than A1, A2 and A3 [State aircraft series or type and/or the maintenance task(s).] [YES/ NO]* [YES/ NO]*
ENGINES B1 Turbine [State engine series or type and/or the maintenance task(s)] Example: PT6A Series
B2 Piston [State engine manufacturer or group or series or type and/or the maintenance task(s)]
B3 APU [State engine manufacturer or series or type and/or the maintenance task(s)]
COMPONENTS OTHER THAN COMPLETE ENGINES OR APUs C1 Air Cond & Press [State aircraft type or aircraft manufacturer or component manufacturer or the particular component and/or cross refer to a capability list in the exposition and/or the maintenance task(s).] Example: PT6A Fuel Control
C2 Auto Flight
C3 Comms and Nav
C4 Doors – Hatches
C5 Electrical Power & Lights
C6 Equipment
C7 Engine – APU
C8 Flight Controls
C9 Fuel
C10 Helicopter – Rotors
C11 Helicopter – Trans
C12 Hydraulic Power
C13 Indicating -recording system
C14 Landing Gear
C15 Oxygen
C16 Propellers
C17 Pneumatic & Vacuum
C18 Protection ice/ rain/fire
C19 Windows
C20 Structural
C21 Water ballast
C22 Propulsion Augmentation
SPECIALISED SERVICES D1 Non Destructive Testing [State particular NDT method(s)]
Part-M Appendix X to AMC M.B.602 (a) and AMC M.B.702 (a) EASA Form 4
Appendix X to AMC M.B.602 (a) and AMC M.B.702 (a) EASA Form 4
COMPETENT AUTHORITY Details of Management Personnel required to be accepted as specified in Part-………………… 1. Name: 2. Position: 3. Qualifications relevant to the item (2) position: 4. Work experience relevant to the item (2) position: Signature: ............................... Date: ...................................... On completion, please send this form under confidential cover to the competent authority
Competent authority use only Name and signature of authorised competent authority staff member accepting this person: Signature: ............................................... Date: .............................................. Name: ..................................................... Office: .............................................
ED 2010/002/R
EASA Form 4
ED 2010/002/R
Appendix XI to AMC to M.A.708 (c)
CONTRACTED MAINTENANCE
1. Maintenance contracts
The following paragraphs are not intended to provide a standard maintenance con-tract but to provide a list of the main points that should be addressed, when appli-cable, in a maintenance contract between an Operator and a Part-145 approved organisation. As only the technical parts of the maintenance contracts have to be acceptable to the competent authority, the following paragraphs only address tech-nical matters and exclude matters such as costs, delay, warranty, etc...
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：CONTINUING AIRWORTHINESS REQUIREMENTS – PART M 2(70)
