S 862-054-N00
(2)
Open these circuit breakers and attach the DO-NOT-CLOSE tags:
(a) P7 Overhead Circuit Breaker Panel
1) 7C12 FLT CONT ELEC 1L AC
2) 7C13 FLT CONT ELEC 1L DC
3) 7C14 FLT CONT ELEC 1R AC
4) 7C15 FLT CONT ELEC 1R DC
5) 7C10 FLT CONT ELEC 2L AC
6) 7C11 FLT CONT ELEC 2L DC
7) 7C16 FLT CONT ELEC 2R AC
8) 7C17 FLT CONT ELEC 2R DC
TASK 76-11-03-002-055-N00
25. Remove the Flap Lever Cover (Fig. 211)___________________________
A. General
(1)
This task gives access to the flap lever assembly.
B.
References
(1)
IPC 76-11-03
C.
Access
(1)
Location Zone
221 Control Cabin, LH
222 Control Cabin, RH
D.
Procedure
S 032-056-N00
(1) Remove the flap lever lightplate.
(a)
Remove the two screws from the flap lever lightplate.
(b)
Disconnect the connector for the flap lever lightplate.
(c)
Remove the flap lever lightplate.
(d)
Keep the flap lever lightplate.
S 022-057-N00
(2) Remove the flap lever cover.
(a)
Remove the four screws from the flap lever cover.
(b)
Lift the flap lever cover.
(c)
Disconnect the inline electrical connector.
(d)
Remove the flap lever cover.
(e)
Keep the flap lever cover.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
76-11-03
ALL ú ú N02 Page 238 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
SCREW (4 LOCATIONS)
SEE A
FLAP LEVER COVER
A
Control Stand - Flap Lever Cover Installation Figure 211
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
76-11-03
ALL ú ú N01 Page 239 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
TASK 76-11-03-402-058-N00
26. Install the Thrust Lever Assembly Switch Covers (Fig. 202)
_______________________________________________
A. References
(1)
IPC 76-11-01 Fig. 2
B.
Access
(1)
Location Zone
221 Control Cabin, LH
222 Control Cabin, RH
C.
Procedure
S 422-059-N00
(1)
Put the switch cover for the thrust lever assembly on the thrust lever assembly.
S 432-060-N00
(2)
Install the three screws in the switch cover.
S 432-061-N00
(3)
Tighten the three screws.
TASK 76-11-03-422-172-N00
27. Install the Fuel Control Switch (Fig. 207)
_______________________________
A. General
(1)
This task installs the fuel control toggle switch assemblies in the engine start module.
B.
References
(1)
IPC 76-11-03 Fig. 3
C.
Access
(1)
Location Zone
221 Control Cabin, LH
222 Control Cabin, RH
D.
Procedure
S 422-174-N00
(1) Install the fuel control switch assembly.
(a) Install the keying washer on the fuel control switch.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
76-11-03
ALL ú ú N02 Page 240 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(b) Install the fuel control switch in the panel of the fuel control module.
NOTE: Make sure that the key on the keying washer is engaged
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 发动机控制 ENGINE CONTROLS(35)
