D.
Procedure
S 012-146-N00
(1)
Do this task: Remove the Microswitch Pack Cover.
S 012-148-N00
(2)
Remove the ceiling panels in the main passenger cabin to get access to the connector plugs below the control stand (AMM 25-22-01/401).
S 022-037-N00
CAUTION: BE VERY CAREFUL DURING THE REMOVAL AND WHEN YOU HOLD THE
_______ MICROSWITCH PACK ASSEMBLY. DAMAGE TO THE SWITCHES, NUTPLATES, OR WIRE CONNECTIONS CAN OCCUR.
(3) Remove the microswitch pack assembly.
(a) Disconnect the electrical connector and install the protection caps on the electrical connector and the mating receptacle as follows: 1) P8
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
76-11-03
ALL ú ú N02 Page 224 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
FLIGHT COMPARTMENT SEE A 4. MICROSWITCH PACK ASSEMBLY
1. SCREW (3 LOCATIONS) COVER FOR THE MICROSWITCH PACK ASSEMBLY
2. SCREW (4 LOCATIONS) A
PACK ASSEMBLY SEE B MICROSWITCH 3. WASHER (4 LOCATIONS)
B
A
Control Stand - Microswitch Installation Figure 208 (Sheet 1)
G52084
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH THRUST REVERSER ú
76-11-03
SYNC LOCKS ú
ú N01 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 225Oct 15/98
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
7. MICRO SWITCHES
( 3 FOR EACH PLUNGER)
5. JAM NUT
B 6. SLEEVE
4. MICROSWITCH PACK ASSEMBLY
B A-A
5. JAM NUT 8. PLUNGER
6. SLEEVE
10. SWITCH TERMINALS (3 LOCATIONS) 7. MICROSWITCH (3 FOR EACH PLUNGER)
9. SCREWS MOUNTING (2 FOR EACH SWITCH)
DIMENSION
A
8. PLUNGER
B-B
Control Stand - Microswitch Installation Figure 208 (Sheet 2)
G52085
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH THRUST REVERSER ú
76-11-03
SYNC LOCKS ú
ú N01 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 226Oct 10/97
ENGINE NO. 1 SWITCH NO. S1B SWITCH NAME SWITCH-AUTOBRAKE/AUTO SPEED BRAKE
S181 SWITCH-THRUST REVERSER (DCV)
S191 SWITCH-THRUST REVERSER SYNC LOCK
ENGINE NO. 2 S182 SWITCH-THRUST REVERSER (DCV)
S2B SWITCH-AUTOBRAKE
S192 SWITCH-THRUST REVERSER SYNC LOCK
ENGINE NO. 3 S3B SWITCH-AUTOBRAKE/AUTO SPEED BRAKE
S183 SWITCH-THRUST REVERSER (DCV)
S193 SWITCH-THRUST REVERSER SYNC LOCK
ENGINE NO. 4 S4B SWITCH-AUTOBRAKE
S184 SWITCH-THRUST REVERSER (DCV)
S194 SWITCH-THRUST REVERSER SYNC LOCK
TABLE 1
SWITCH IDENTIFICATION FOR AIRPLANES
WITH THRUST REVERSER SYNC LOCK
Control Stand - Microswitch Installation
Figure 208 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH THRUST REVERSER ú
76-11-03
SYNC LOCKS ú
ú N01 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 227Oct 10/97
G52062
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
SEE A 1. SCREW (3 LOCATIONS) PACK ASSEMBLY MICROSWITCH COVER FOR THE
BSEE PACK ASSEMBLY MICROSWITCH 3. WASHER 2. SCREW (4 LOCATIONS) (4 LOCATIONS)
4. MICROSWITCH PACK ASSEMBLY
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 发动机控制 ENGINE CONTROLS(31)
