57-54-01
ALL ú ú B01 Page 405 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
1.
2.
3.
A
737-300/400/500MAINTENANCE MANUAL
SPOILERS - DESCRIPTION AND OPERATION
____________________________________
General
_______
A. The spoilers consist of four ground spoilers and four flight spoilers.Ground Spoilers
_______________
A. A ground spoiler panel is located inboard of the engine and furthest outboard on each wing (Fig. 1). The ground spoiler panels are of bonded honeycomb construction. They are constructed with upper and lower skins of clad aluminum alloy and with a nonperforated aluminum alloy honeycomb core. A continuous phenolic rub strip is bonded to the lower surface at the trailing edge. Dacron covered silicone rubber seals are installed at each end and at the forward edge. The seals at each end are adjustable.
B. The ground spoilers are attached to wing structure by four hinge fittings equipped with self-aligning bearings. The ground spoilers are attached to wing structure aft of the rear spar. A ground spoiler actuator linkage is attached between wing structure and two arms on the leading edge of the inboard ground spoiler. Bonding jumpers provide an electrical bond between the ground spoiler panels and wing structure.
Flight Spoilers
_______________
A. Spoiler panels raise to provide spoiler action. The spoiler panels are of bonded honeycomb construction with upper and lower skins of clad aluminum alloy and a nonperforated aluminum honeycomb core. A continuous phenolic rub strip is bonded to the lower surface at the trailing edge. Dacron covered silicone rubber seals are installed at each end and the forward edge. The seals at each end are adjustable.
B. Spoilers are attached to wing structure by four hinge fittings equipped with self-aligning bearings. The flight spoilers are located forward of the outboard flaps and are attached to wing structure aft of the rear spar. The four flight spoiler actuators are attached between the spoiler panels and wing structure at the spanwise center of each spoiler panel. Bonding jumbers provide an electrical bond between spoiler panels and wing structure.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
57-55-00
ALL ú ú B03 Page 1 ú Feb 25/86
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500
MAINTENANCE MANUAL
GROUND SPOILERS
9
8 FLIGHT SPOILERS
7 6
GROUND
5 SPOILER
GROUND SPOILER
FLIGHT SPOILERS
4
GROUND SPOILER
3 2
1 0
SEE A
SPOILER (TYPICAL)
A
Spoilers
Figure 1
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
57-55-00
ALL ú ú B01 Page 2 ú Oct 25/84
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
