(3) If the fault continues:
(a) Do the trouble shooting procedure (Ref. TASK 31-32-00-810-932) related to the DSI 07 and DSI 13 signals of the ELAC2 (2CE2) (Ref. ASM 27-92/44). If you find a defect:
- repair it
- do the test given in Para. 3.
If you do not find any defect, continue the trouble shooting.
(4) If the fault continues:
(a) Do the trouble shooting procedure (Ref. TASK 31-32-00-810-934) related to the DGI 04 Bus of the ELAC2 (2CE2) (Ref. ASM 27-92/52), (Ref. ASM 22-86/02). If you find a defect:
- repair it
- do the test given in Para. 3.
If you do not find any defect, continue the trouble shooting.
(5) If the fault continues:
(a) Do a check of the wiring of the DSO 07 signal from the ELAC2 (2CE2) COM part and MON part to the FMGC1 (1CA1) (Ref. ASM 27-92/44)
- if there is continuity see Para. (b)
- if there is no continuity repair the above wiring.
(b) Do a check of the wiring of the DSI 07 signal from the ELAC2 (2CE2) COM part and MON part to the FMGC1 (1CA1) (Ref. ASM 27-92/44), (Ref. ASM 22-85/03).
- if there is continuity see Para. (c)
- if there is no continuity repair the above wiring.
(c) Do a check of the wiring of the DSI 13 signal from the ELAC2 (2CE2) COM part and MON part to the FMGC1 (1CA1) (Ref. ASM 27-92/44), (Ref. ASM 22-85/03).
- if there is continuity see Para. (5)
- if there is no continuity repair the above wiring.
(d) Do a check and repair the wiring of the DGI 04 Bus from the ELAC2 (2CE2) COM part and MON part to the FMGC1 (1CA1) (Ref. ASM 27-92/52), (Ref. ASM 22-86/02).
B. If the F/CTL ELAC2 FAULT warning comes into view 1 second after the AP2 engagement:
(1) Replace the FMGC-2 (1CA2) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : 001-049, 051-099, 101-105, 151-199, ∞∞27-93-00∞∞∞∞∞∞∞∞∞∞Page B271
201-214, Aug 01/05R
CES
(2) If the fault continues:
- replace the ELAC-2 (2CE2) (Ref. AMM TASK 27-93-34-000-001) and (Ref. AMM TASK 27-93-34-400-001).
(3) If the fault continues:
(a) Do the trouble shooting procedure (Ref. TASK 31-32-00-810-932) related to the DSI 10 and DSI 17 signals of the ELAC2 (2CE2) (Ref. ASM 27-92/44), (Ref. ASM 22-85/03). If you find a defect:
- repair it
- do the test given in Para. 3.
If you do not find any defect, continue the trouble shooting.
(4) If the fault continues:
(a) Do the trouble shooting procedure (Ref. TASK 31-32-00-810-934) related to the DGI 05 Bus of the ELAC2 (2CE2) (Ref. ASM 27-92/52), (Ref. ASM 22-82/06). If you find a defect:
- repair it
- do the test given in Para. 3.
If you do not find any defect, continue the trouble shooting.
(5) If the fault continues:
(a) Do a check of the wiring of the DSO 08 signal from the ELAC2 (2CE2) COM part and MON part to the FMGC2 (1CA2) (Ref. ASM 27-92/44)
- if there is continuity see Para. (b)
- if there is no continuity repair the above wiring.
(b) Do a check of the wiring of the DSI 10 signal from the ELAC2 (2CE2) COM part and MON part to the FMGC2 (1CA2) (Ref. ASM 27-92/44), (Ref. ASM 22-85/03).
- if there is continuity see Para. (c)
- if there is no continuity repair the above wiring.
(c) Do a check of the wiring of the DSI 17 signal from the ELAC2 (2CE2) COM part and MON part to the FMGC2 (1CA2) (Ref. ASM 27-92/44), (Ref. ASM 22-85/03).
- if there is continuity see Para. (d)
- if there is no continuity repair the above wiring.
(d) Do a check and repair the wiring of the DGI 05 Bus from the ELAC2 (2CE2) COM part and MON part to the FMGC2 (1CA2) (Ref. ASM 27-92/52), (Ref. ASM 22-86/02).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : 001-049, 051-099, 101-105, 151-199, ∞∞27-93-00∞∞∞∞∞∞∞∞∞∞Page B272
201-214, Aug 01/05R
CES
C. If the F/CTL ELAC2 FAULT warning comes into view 5 seconds after the AP engagement:
(1) On the CAPT side stick, push and hold the takeover and priority pushbutton switch:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 飞行操纵 3(82)
